Problem with PCR800 and rfxtrx433e

This is intended for discussion and information about the rfxcom receiver module

Moderator: Mattk

Post Reply
Armond
Fresh Boarder
Fresh Boarder
Posts: 17
Joined: Mon Dec 14, 2015 5:43 pm

Problem with PCR800 and rfxtrx433e

Post by Armond » Thu Jan 28, 2016 10:55 pm

I have meteohub, update 5.0l (Build 146) and rfxtrx433e, firmware 250 and Oregon rainsensor PCR800.
The problem is that I don't get any signal from the sensor. It just say last signal "never".
I have fresh batteries and the distance between the rainsensor and rfxtrx433e is about 5 to 10 meters.
Has anybody a solution or having the same problem?

My THGR810, BTHR918N and WGR800 sensors works fine and updates in meteohub.

b_weijenberg
Fresh Boarder
Fresh Boarder
Posts: 2
Joined: Sat Jul 03, 2010 9:58 am

Re: Problem with PCR800 and rfxtrx433e

Post by b_weijenberg » Fri Jan 29, 2016 6:25 pm

Send an email to support rfxcom.com for a beta firmware version 251

Armond
Fresh Boarder
Fresh Boarder
Posts: 17
Joined: Mon Dec 14, 2015 5:43 pm

Re: Problem with PCR800 and rfxtrx433e

Post by Armond » Wed Feb 03, 2016 1:58 pm

I got the firmware V251 and enabled just the Oregon sensors with RFXmngr.
But when I turned on the RPi I can't get access to the GUI or with putty.

---------------------------------------------------------------------------------------------------------

Now I installed everything from the beginning and can access the GUI.
As I said, update the RFXcom with v251 and enabled just the Oregon sensors in RFXmngr.
When I look in the meteohub log it says:
logger (03.02.2016 19:47:38): station 0 (RFXTRX 433MHz), enabled protocols: undecoded, La Crosse, Hideki, Oregon Scientific, X10
How can it come that La Crosse, Hideki, X10 still is enabled?

rune
Expert Boarder
Expert Boarder
Posts: 100
Joined: Wed Jun 24, 2009 10:51 pm

Re: Problem with PCR800 and rfxtrx433e

Post by rune » Sun Feb 07, 2016 5:07 pm

It was brought up earlier, but Boris never replied (viewtopic.php?f=4&t=10210&p=17195&hilit=rain+x10#p17195)

Armond
Fresh Boarder
Fresh Boarder
Posts: 17
Joined: Mon Dec 14, 2015 5:43 pm

Re: Problem with PCR800 and rfxtrx433e

Post by Armond » Tue Feb 09, 2016 9:51 am

Ok, thanks!

Post Reply