MR3020 Stuck on Landing Page after FW reload **solved**

All about the standard Meteobridge devices based on mobile routers from TP-Link, D-Link, ASUS

Moderator: Mattk

Post Reply
erich
Fresh Boarder
Fresh Boarder
Posts: 4
Joined: Wed Sep 13, 2017 6:11 pm

MR3020 Stuck on Landing Page after FW reload **solved**

Post by erich » Wed Sep 13, 2017 6:20 pm

Decided to re-load the firmware on my MR3020 after having some issues. Found and loaded the newest version 1.5 successfully, but it's now stuck on the landing page, which shows the following status after multiple reload attempts:

IMAGE LOAD PROTOCOL:
--2017-09-13 16:03:29-- http://download.meteobridge.com/cgi-bin ... AbMgEiJfDo
Resolving download.meteobridge.com... 88.99.105.253, 2a01:4f8:10a:f98::4711
Connecting to download.meteobridge.com|88.99.105.253|:80... connected.
HTTP request sent, awaiting response...

Occasionally it will show this:

IMAGE LOAD PROTOCOL:
--2017-09-13 16:09:57-- http://download.meteobridge.com/cgi-bin ... AbMgEiJfDo
Resolving download.meteobridge.com... 88.99.105.253, 2a01:4f8:10a:f98::4711
Connecting to download.meteobridge.com|88.99.105.253|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/x-perl]
Saving to: '/tmp/image.tgz'

0K 0.00 =0s

2017-09-13 16:09:57 (0.00 B/s) - '/tmp/image.tgz' saved [0/0]

Which looks to me like it's downloaded a 0 length file. It then goes back to displaying HTTP request sent, awaiting response.

Thanks for any suggestions you can provide.

Mattk
Gold Boarder
Gold Boarder
Posts: 295
Joined: Mon Sep 22, 2014 3:24 am

Re: MR3020 Stuck on Landing Page after FW reload

Post by Mattk » Wed Sep 13, 2017 10:30 pm

That newest firmware 1.5 was to fix the latest TP-link version boxes, not sure if 1.5 should be retro-fitted to the older boxes that worked with 1.4?

erich
Fresh Boarder
Fresh Boarder
Posts: 4
Joined: Wed Sep 13, 2017 6:11 pm

Re: MR3020 Stuck on Landing Page after FW reload

Post by erich » Wed Sep 13, 2017 10:45 pm

1.5 is the only version available on:
http://meteobridge.com/wiki/index.php/P ... g_Hardware
and the notes do not not say anything about not loading it on older versions of the MR3020.
If it were incompatible, I would think that the device would not boot at all, mine boots but is stuck trying to download an image file.
I ssh'd in and found the /tmp/image.log file, it's just filled with:

--2014-01-12 02:51:49-- http://download.meteobridge.com/cgi-bin ... AbMgEiJfDo
Resolving download.meteobridge.com... 88.99.105.253, 2a01:4f8:10a:f98::4711
Connecting to download.meteobridge.com|88.99.105.253|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/x-perl]
Saving to: '/tmp/image.tgz'

0K 0.00 =0s

2014-01-12 02:51:50 (0.00 B/s) - '/tmp/image.tgz' saved [0/0]

image.tgz exists but has a size of 0 bytes.
It really looks like this file does not exist or is wrong on download.meteobridge.com so the meteobridge image never loads which is why I'm stuck on the landing page.

Mattk
Gold Boarder
Gold Boarder
Posts: 295
Joined: Mon Sep 22, 2014 3:24 am

Re: MR3020 Stuck on Landing Page after FW reload

Post by Mattk » Wed Sep 13, 2017 11:19 pm

Is your internet connection all good?

erich
Fresh Boarder
Fresh Boarder
Posts: 4
Joined: Wed Sep 13, 2017 6:11 pm

Re: MR3020 Stuck on Landing Page after FW reload

Post by erich » Thu Sep 14, 2017 12:06 am

Yes. Everything else in the home is able to use the Internet normally.

doncurtis
Senior Boarder
Senior Boarder
Posts: 51
Joined: Wed Jan 25, 2017 2:12 am

Re: MR3020 Stuck on Landing Page after FW reload

Post by doncurtis » Fri Sep 15, 2017 3:27 am

Your server, at least the one used to log onto your meteobridge from the internet is down.
---------
Don

User avatar
admin
Platinum Boarder
Platinum Boarder
Posts: 5026
Joined: Mon Oct 01, 2007 10:51 pm

Re: MR3020 Stuck on Landing Page after FW reload

Post by admin » Fri Sep 15, 2017 10:14 pm

We had problems loading older SW versions (3.3 and older) for TP-Link MR3020 Meteobridges flashed with new firmware 1.5.
But this is solved since yesterday.

erich
Fresh Boarder
Fresh Boarder
Posts: 4
Joined: Wed Sep 13, 2017 6:11 pm

Re: MR3020 Stuck on Landing Page after FW reload

Post by erich » Fri Sep 15, 2017 10:20 pm

Thanks!
I plugged my MR3020 back in and it was able to download the image and come online. It ran reliably for so long that I had not even noticed my license to get updates had expired, renewed the license and I'm now running 3.4.

Post Reply