No connection on Vantage Pro 2 / "can't open /dev/ttyMH"

This section covers the Meteobridge PRO units exclusively

Moderator: Mattk

Post Reply
ChrisBoom
Fresh Boarder
Fresh Boarder
Posts: 1
Joined: Wed Nov 29, 2017 6:40 pm

No connection on Vantage Pro 2 / "can't open /dev/ttyMH"

Post by ChrisBoom » Wed Nov 29, 2017 6:48 pm

Hi all,

after setting up the Meteobridge Pro I cannot connect to my Vantage Pro 2, neither by USB (Fjord Logger to USB 2.0 Hub to MB Pro) nor using the RF antenna. I even set it up right next to the ISS but to no avail. The log file below shows an error ("can't open /dev/ttyMH") and processes will stop.

A firmware update for the RF antenna returns:

Stopping loggerd... done.
Downloading flash tools and recent Meteostick firmware... done.
Extracting archive... done.
Resetting USB device... done.
Flashing Meteostick firmware... failed.
Starting loggerd... done.

I hope I did not receive a defective unit as for this price I'd expect something rock solid. Has anyone been able to resolve the issue described above?

Best regards
Chris


Here's the log, trying to connect through USB (first), then RF:

oled (17.12.2015 00:01:41): process started.
database (29.11.2017 16:26:39): process started.
wnetd (29.11.2017 16:26:47): process started.
system (29.11.2017 16:26:47): start of logging process initiated.
logger (29.11.2017 16:26:47): databases connected. Update interval 3600 seconds.
logger (29.11.2017 16:26:47): historical data loaded (0 records).
logger (29.11.2017 16:26:47): data logger (version 5.0w, build 11648) started.
database (29.11.2017 16:26:48): database sync done (28 tables, 92/174 writes)
logger (29.11.2017 16:26:49): connect station 9 (System Data via Plug-in).
logger (29.11.2017 16:26:52): waiting for sensors (wind0, rain0, th0, thb0) to provide data.
logger (29.11.2017 16:26:52): services paused.
system (29.11.2017 16:28:42): stop of logging process initiated.
logger (29.11.2017 16:28:42): parent process received termination signal (15).
logger (29.11.2017 16:28:42): child process received termination signal (15).
system (29.11.2017 16:28:43): start of logging process initiated.
logger (29.11.2017 16:28:43): databases connected. Update interval 3600 seconds.
logger (29.11.2017 16:28:43): historical data loaded (0 records).
logger (29.11.2017 16:28:43): data logger (version 5.0w, build 11648) started.
logger (29.11.2017 16:28:46): connect station 0 (Vantage via USB serial).
logger (29.11.2017 16:28:46): connect station 9 (System Data via Plug-in).
logger (29.11.2017 16:28:46): wakeup sent.
logger (29.11.2017 16:28:46): internal logger activated.
logger (29.11.2017 16:28:46): syncing.
logger (29.11.2017 16:28:49): waiting for sensors (wind0, rain0, th0, thb0) to provide data.
logger (29.11.2017 16:28:49): services paused.
logger (29.11.2017 16:28:50): No timezone defined. Set to GMT as default.
logger (29.11.2017 16:28:56): gettime request sent.
logger (29.11.2017 16:29:16): message above repeats 2 times.
system (29.11.2017 17:29:19): stop of logging process initiated.
system (29.11.2017 17:29:26): start of logging process initiated.
logger (29.11.2017 17:29:26): databases connected. Update interval 3600 seconds.
logger (29.11.2017 17:29:26): historical data loaded (0 records).
logger (29.11.2017 17:29:26): data logger (version 5.0w, build 11648) started.
logger (29.11.2017 17:29:27): can't open device /dev/ttyMH: No such file or directory
logger (29.11.2017 17:29:27): connect station 9 (System Data via Plug-in).
logger (29.11.2017 17:29:30): waiting for sensors (wind0, rain0, th0, thb0) to provide data.
logger (29.11.2017 17:29:30): services paused.
logger (29.11.2017 17:29:57): can't open device /dev/ttyMH: No such file or directory
logger (29.11.2017 17:30:27): message above repeats 1 time.
system (29.11.2017 17:30:45): stop of logging process initiated.
system (29.11.2017 17:30:51): start of logging process initiated.
logger (29.11.2017 17:30:51): databases connected. Update interval 3600 seconds.
logger (29.11.2017 17:30:51): historical data loaded (0 records).
logger (29.11.2017 17:30:51): data logger (version 5.0w, build 11648) started.
logger (29.11.2017 17:30:53): can't open device /dev/ttyMH: No such file or directory
logger (29.11.2017 17:30:53): connect station 9 (System Data via Plug-in).
logger (29.11.2017 17:30:56): waiting for sensors (wind0, rain0, th0, thb0) to provide data.
logger (29.11.2017 17:30:56): services paused.
logger (29.11.2017 17:31:23): can't open device /dev/ttyMH: No such file or directory
logger (29.11.2017 17:32:53): message above repeats 3 times.
logger (29.11.2017 17:32:54): give up waiting for sensors after 120 secs.
logger (29.11.2017 17:32:54): services activated.
logger (29.11.2017 17:33:23): can't open device /dev/ttyMH: No such file or directory
logger (29.11.2017 17:36:53): message above repeats 7 times.
system (29.11.2017 17:36:53): stop of logging process initiated.
system (29.11.2017 17:37:00): start of logging process initiated.
logger (29.11.2017 17:37:00): databases connected. Update interval 3600 seconds.
logger (29.11.2017 17:37:00): historical data loaded (0 records).
logger (29.11.2017 17:37:00): data logger (version 5.0w, build 11648) started.
logger (29.11.2017 17:37:01): can't open device /dev/ttyMH: No such file or directory
logger (29.11.2017 17:37:01): connect station 9 (System Data via Plug-in).
logger (29.11.2017 17:37:04): waiting for sensors (wind0, rain0, th0, thb0) to provide data.
logger (29.11.2017 17:37:04): services paused.

User avatar
admin
Platinum Boarder
Platinum Boarder
Posts: 5026
Joined: Mon Oct 01, 2007 10:51 pm

Re: No connection on Vantage Pro 2 / "can't open /dev/ttyMH"

Post by admin » Sun Dec 03, 2017 1:04 pm

Hi, can you please give me remote access as explained here:
viewtopic.php?f=57&t=9885

I will need URL and password. Please send this to "info(at)meteobridge.com".

Post Reply