meteohub.de

From the weather network page —-
System Message
Error: Meteobridge Weather Cam: http://upload.meteobridge.com/cgi-bin/cam.pl?test=1: 2018-02-20 15:14:12 ERROR 503: Service Unavailable.

Camera link (content.meteobrige.com) is also down (503)
From the remote login, the camera + text (admin.meteobridge.com) works.

With this configuration, My>Acurite is reading about 6 points low.
I think there is another thread addressing this situation.

I reset the MeteoBridge and it picked up the “Indoor” sensor (pressure).
I also needed to set the bridge to “station pressure” to get the expected value.

Bridge application version 224
Bridge boot f/w version 104

Sorry, I didn’t look at the log, just the live data. Obvious error —-
logger (01.02.2018 12:30:44): Bad thb0(0) sensor data, "sea level pressure x10" (13514) out of range [4000:13000]

The pressure correction is set to 0.000 inHg.

I switched back to the Internet Bridge from the Access and am not logging pressure data any longer.

Live Data
Sensor
Outdoor #5

Am running Meteobridge 3.5 (Jan 28 2018, build 11900), FW 1.3

My>Acurite reports pressure so the bridge is sending the data.

Any ideas. Thanks

Any plans to look at supporting the Access?
You can use mine remotely if needed.
Thanks.

I examined the boot messages and noticed duplicate senor assignments to non-existent devices.
Using the unlink sensors check box on the Weather Station page restored the list to my sensors.
Working as expected now.

Did not help.

Here is the system page show the live data and logging:
https://www.dropbox.com/s/dehrxsr63zp1o6s/Photo%20Feb%2020%2C%206%2040%2000%20AM.png?dl=0
https://www.dropbox.com/s/dehrxsr63zp1o6s/Photo%20Feb%2020%2C%206%2040%2000%20AM.png?dl=0

The startup log:
https://www.dropbox.com/s ...

I sometimes see an active sensor # change causing my annotated image to display dashes.
Usually I can update the command line to the latest sensor # and get things working.

I attempted to fix this again yesterday and in the procsss rebooted to the latest f/w.
Now I have Live Data sensors listed ...

The green check marks are back.
Thanks.

Even though it appears to work, I get this error:
Error: Meteobridge Weather Cam: Read error (Connection timed out) in headers.

There are red x's on the interval and overlay text lines.

I added the station WU call sign to the image and now get the error.

New: -pointsize 15 -fill orange -draw ...

Does the single channel version of the Davis Envoy also work with the MeteoBridge. These are about 60% of the cost.
Thanks

Suggestion -
Adding the build version (I.e., 5909) to the release log date would help correlate what is actually installed. Thanks.