meteohub.de

btw, does pressing the Reset Button making any difference to the MeteoBridge?

Hi,

I have configured the MeteoBridge using the WLAN to push data to my own server, and it works fine, however, I can not access the web interface (for configuration) any more, I still have it connected to the Cabled network. can anyone help? what shall I do if i want to re-configure it?

Have the problem solved now, however, not sure how did it happen, just re-connect, re-configure and re-start everything, same as i did in the last few days, but seems now the meteoBridge getting the live data now.
Thanks Everyone

Hi;
It works fine with the weatherLink software.

admin wrote:Please make it working with weatherlink on the PC first.
If you have done that, we can give it a try on Meteobridge again.

I have already done this before:
First remove the data logger from your Vantage Pro2 and connect it to your PC. Then run the piece of software installed under WeatherLink called CP210X USB to Serial Convertor. Follow the instructions and change your USB data logger mode to serial (not USBXpress ...

problem solved, the weather station we have is actually a US version, although we are in Europe now.

Hi ;

I have a Davis Vantage Pro2 station, a meteoBridge and a MeteoStick, and I am working on Sending the weather data to my own web server via HTTP request.
however, in the live data tab, from the meteoBridge web interface, there are only indoor data, but no outdoor data. is this means it ...

Thanks Admin for your help;

About the "Green dot logger", the problem is that when we buy it, we won't know which version is it, as there is only one version of USB data logger from Davis. I bought it more than a month ago, and there was no "Green dot" on the package.
Yes, I used it with the ...

Thanks for your help;
however, still didn't solve the problem, since could not find anything that can convert the data logger back to the normal USB mode, within the weatherLink , there is only a CP210X USB to Serial Converter.
and I actually have two USB data logger, one of them is new, never used ...

Thanks for your help.
I am using the USB hub that comes with the Meteobridge. and yes, i was using the data logger with the WeatherLink application, and also used it with my own java program. Can I ask you how to reset the logger to the normal usb serial mode?

btw, the battery is full.

Hi All;

I am using a Davis Vantage Pro2 weather station, and I want to use the MeteoBridge to send the weather information to my own weather Server via HTTP Request.
and I am using the WeatherLink USB Data logger connect the (weather station) Console , however, I got the " communication blocked ...

thanks for your reply.

I am sure i have connected it correctly, following the user manual.

however, all the installation and configuration is based upon successfully connected to the router via a web browser. this is where i am stuck.
so could you think of any reasons cause this? could it be a ...

NO, i didn't flash Meteobrige, still in the very first step. My understanding is that once I connect the TL-MR3020 to the Ethernet port and power source, then I should be able to find the wireless network ( SSID) named TP-LINK_POCKET_3020_*, then do the configurations.. but still can not find the ...

Hi;

I just got a new Portable 3G/4G wireless N Router (TL-MR3020), I connected it as the Standard AP Mode, However, i couldnot find the wireless network ( SSID) named TP-LINK_POCKET_3020_* . I also tried the WISP Client Router Mode, but still can not find the wireless network. I am using MAC OS ...