meteohub.de

Maybe this is what you are looking for:
https://www.davisinstruments.com/product_documents/weather/manuals/07395-234_IM_06312.pdf
page 26: Calibrating Temperature And Humidity


Wim - that was EXACTLY what I was looking for. I still found it quite annoying with the 5C too high temp on the console ...

The calibration thing as stated works as a charm towards anything that uses the data... :D


One question: Is it in any way possible to also calibrate the displayed value on the Console itself - i.e. for the console to display the calibrated value in stead of the raw sensor value :?:


I'm still ...

This with the battery door off. If you have it on the wall its not going to look very nice. Mine sits on a shelf and is behind the console.


Thank you for the effort of taking the photo. It would definitely require something built to hide it to make an external solution using the cable work

I ...

The new option to calibrate installed on the Nano at reboot just as it should (if only every software supplier had this turnaround time... :D )

It does its magic to the numbers visible in e.g. WeatherDisplay, although I need to adjust by around -5,3C to be about right - pending longer term ...

Please don't do that. It will look awful. If you really insist, take the box the NANO was shipped in and cut something out to have the cable passing through. But come on, calibration is the better way. And it is just about indoor temp, nothing even a serious weather enthusiast would care too much ...

Console version I will need to check but I'm fairly sure same applies for the same reason, I will confirm

Would be interesting if it was so. At least, it is not immediately visible from behind the battery door like it isn't for admin, but then again, there may be a way to connect deeper in the ...

Hi Mark.

Thanks for your quick and elaborate resonse! :)

I was actually also thinking along the lines of an extension cable - really good to see that it can be done and how to go about it.

I'll be really interested in seeing your installation photo, particularly how you have dealt with the ...

Hi.

Just today, for my Davis VP II, I recieved my shiny new and impressively small Nano :mrgreen:

While going through the configuration, I noticed the indoor temperature registered at 30C :shock:

It is clear, that it is the Nano that dissipates heat - opening up to the Nano, and putting a ...