meteohub.de

Are you missing the data in Live Data - Raw Data tab? I can’t think of a reason why a second station should be handled differently. Are settinds of the two stations identically, apart from transmitter id?


The data does not show in “Raw Sensor Data”. For the soil moisture sensor in slot 2 (there ...

I recently added a second soil station (so 2 soil stations and 1 vantage pro 2 ISS). However, I noticed that for the second soil station, Meteobridge will only show a moisture reading if there is also a temperature sensor connected to the corresponding temperature slot (i.e., I have a soil moisture ...

When unplugging one or all of my soil temperature probes connected to a Davis soil/leaf station, Meteobridge still shows that data is being sent when looking under “Raw Sensor Data”. The ‘temperature’ it is reporting is simply the last temperature that was measured before the probe was unplugged ...

I don’t have "integrate client on Meteobridge's LAN adapter into WLAN" turned on, and currently there’s no wireless network information saved since I’ve connected it through Ethernet at the moment. I think I’ve accidentally done that in the past (before this problem began), but I’ll be sure not to ...

Yes, DHCP is turned off on the access point and the access point is connected to the main router LAN to LAN.

Sadly the problem has resurfaced with me unable to access my Meteobridge via its local IP but still able to access it via the remote URL. When trying to ping the IP from my local computer ...

Thanks for the quick response and questions! I answered those below.

Since I had downgraded the firmware to v4.4 to troubleshoot and that didn't help, I went ahead and upgraded back to 5.0. As a result, right now I can still connect via local IP and have been able to for several hours. Usually the ...

Over the past couple of days I’ve been unable to connect to my Meteobridge (flashed on a TL-MR3020) locally via a web browser using its IP. However, it is still sending data to my SQL databases and uploading to Weather Underground. I can also still access the Meteobridge interface using the remote ...

I was having this same problem and posted about it, but I just now saw this post. I managed to solve it for myself, and I described what I did here: viewtopic.php?f=56&t=15268&sid=f49a23ee ... 889ced689a

** Solved **

Previously I had my Envoy8x configured with Receiver ID as 2 and my Vantage Pro 2 Plus ISS on channel 2 since I used to have another ISS on channel 1. With the Weather Data Transfer Utility program for the Envoy8x, reconfiguring my Envoy8x by changing the Receiver ID to 1 and the ...

I recently upgraded to Meteobridge software version 5.0 from 4.2 and I am having issues with it not providing data for several variables: wind chill, heat index, and dew point. I believe this is some issue with these being variables that are calculated from other variables. There is simply no data ...