meteohub.de

Thanks for looking into this and making the fix! Everything seems to be working as it should now.

Collisions on port 5553 look strange to me. Furthermore, the GW3000 does not even report the connected sensors. This is how it looks like on my setup:

logger (22.05.2025 01:20:58): connect station 1 (GW3000 via SW Driver).
logger (22.05.2025 01:20:58): connect station 9 (System Data via Plug-in ...

logger (18.05.2025 09:11:08): data logger started.
logger (18.05.2025 09:11:09): connect station 0 (GW1000 via TCP/IP).
logger (18.05.2025 09:11:09): connect station 1 (GW3000 via SW Driver).
logger (18.05.2025 09:11:38): historical data loaded (50 records).
logger (18.05.2025 09:11:38): data logger ...

Nothing works = 100% nothing . DOA.

If I use my GW3000 and the GW1000 station setting in the MB everything works.
Now, if I use my GW3000 and the GW3000 station setting in the MB nothing works. No populating of weather data, no sending your data to any of the weather sites. Dead.

I'm using an ...

Ambient Weather Meteobrige running version 6.2

When setting the GW3000 as the primary station nothing works.
When using the GW3000 and using the GW1000 setting as it station, it works fine.

Did the upgrade 12 hours ago and all is good!

THANK YOU VERY MUCH!

This is from the gw 2000 app. I Was using the wrong app for prior post. Sorry

08:30:08 AM [ LIVEDATA ]
OK
Size: 174 bytes

Last Update : 08:30:11 AM
┌───────────────────────────────────────┐
08:49:37 AM [ LIVEDATA ]
OK
FIRMWARE: GW2000B_V3.1.3
Size: 174 bytes

Last Update : 08:49:40 AM ...

08:30:08 AM [ LIVEDATA ]
OK
Size: 174 bytes

Last Update : 08:30:11 AM
┌───────────────────────────────────────┐
0xFF 0xFF 0x27 0x00 0xAE 0x01 0x00 0xD8
0x06 0x37 0x08 0x26 0x72 0x09 0x27 0xC1
0x02 0x00 0xAD 0x07 0x46 0x0A 0x00 0x64
0x0B 0x00 0x00 0x0C 0x00 0x00 0x15 0x00
0x00 0xA9 0x88 ...

I could get that webpage to load. Hope this helps. Using gw2000 (gw1000 setting in mb)

INTEMP C x10: 216 - F: 70.9
OUTTEMP C x10: 18744 - F: 3,405.9
DEWPOINT C x10: - F: ---
WINDCHILL C x10: - F: ---
HEATINDEX C x10: - F: ---
INHUMI %: 108 - %: 108
OUTHUMI %: 68 - %: 68
ABSBARO hpa: 9842 - hPa: 984 ...

This error even occurs on your system when update interval set to 10 mins. Only explanation I have is that you have another PC reporting with same credentials to windy and this causes the rejections.


The meteobridge is the only source that I send data to Windy. Been sending data to Windy for a ...

Think I may have figured this out.

I added a Ecowitt WH46 Air Quality Sensor recently. This replaced the Ecowitt 45 air sensor. https://www.amazon.com/dp/B0CSSJDJYX?psc=1&ref=ppx_yo2ov_dt_b_product_details

Now I removed the sensor and no longer sending it's data to the meteobridge.

Been about an ...

Rolling back to 5.8. Too many issues with 6.0 Corrupt MIN /MAX data. Tried to erase all and start over. Nojoy.

5.8 so far is holding min / max data normally. Fingers crossed.

Wondering if this also was related to some far-out wacky numbers on the MIN/MAX.
Posted here https://forum.meteohub.de/viewtopic.php?t=18023

Since removing Windy the MIN/MAX numbers seem to be normal, fingers crossed. That said, there is a whole lot of bad numbers in the min/max.
Years worth all ...

Think it was 5.8.