meteohub.de

As the title indicates it seems that my red meteobridge is starting to slowly kick the bucket.

I get a format failed on boot and then the unit doesn't seem to properly read my weatherstation sensors. Is there a way to get a new internal USB stick? Also, the dispaly has some decent burn in. Not sure ...

See attached.

Maybe try another channel for your ISS.
I had problems with wrong readings of wind data
Changed to channel 5 with the ISS and haven't had any problems since.
Maybe there is an interference from a nearby soursce?


I am willing to try this. Even though the console has no issue receiving data from ...

Is there anything untoward in System/Logging page?

Also is the antenna connection tight?

-71db doesn’t seem right for a transmitter 15ft away.


When I wasn't getting a connection this AM for a brief period I had:


logger (30.10.2021 09:02:47): message above repeats 1 time.
logger (30.10.2021 ...

Ok so when you change the frequency, up and down the whole spectrum, how are you doing this?

Has to be a simple answer to this one? I don't have that answer but I have run the same hardware directly, via re-transmit, via repeaters literally for years across multiple sites without issue. So what ...

....The unit is within sufficient range of the Davis Vantage Pro2 weather station.....

Sufficient range .... Which is?

There are many factors to take into account re reception, many do appear to be over expecting in regard reception when comparing to a Davis console/ISS combination. First lets ...

Is it just the drop of RF signal from time to time that makes you unhappy? I ask because you speak about "genuinely unhappy".
Did you try retransmits from the console (which helps when sensor data coming in weak)?


The RF signal is the main issue. The console never has issues, however, I know ...

For years I ran Meteobridge on my own hardware that was connected to the local network and read the network data from the IP logger without issue.

I decided to finally give Meteobridge Pro a go as it would be nice to not have to rely on the IP logger.

Since March I've had nothing but issues of ...

I just received my red Meteobridge Pro and have been setting it up today. At first I setup the Primary Station to receive RF data directly on Transmitter #1 (ISS). Never got a signal. Then I tried to receive RF data via console on Transmitter 2 which is the consoles retransmit ID. Still nothing ...