meteohub.de

Hi Michael,
I didn't found a solution yet.
But I was in contact with Boris regarding this problem.
It might be helpful that you have a problem with the crontab too to find a final solution.

Regards Billy

Maybe this link could help?

viewtopic.php?f=20&t=8797&p=11475&hilit ... 555#p11475

Billy

Just updated my DC01 System to 4.9n.

Problem, changing the password from meteohub to another one via "Wartung" not possible.
The old one "meteohub" is still valid.

Regards
Billy

:?: I get/got different results when calling the same perl script via crontab on Sheeva and DC01.
Im calling a perl script via Crontab

10 0 1 * * /usr/bin/perl /data/month/monpar.pl

The idea is getting every 1st of month a packet of parameters.

On sheeva I get the result as expected 1st of month ...

Thanks a lot for your comments.

Not yet reproducible for me. :x
Time Synchonization: running now since yesterday twelve o'clock

Nevertheless the last ntp entry was later
26 Apr 16:00:59 ntpd[1563]: Listen normally on 6 eth0:0 192.168.1.77 UDP 123
26 Apr 16:01:00 ntpd[1563]: ntpd exiting on signal ...

After some recomputation Time Synchonization: started again.
Don't know why. Will have a look on that!

Hi Boris, I'm going step by step through all Meteohub functionalities on DC01.
I got the message:
DC01 Time Synchonization: stopped

The System Info shows
Process
Weather Data Recomputation: completed
Weather Data Logging: running (last data: 34 sec)
SSH Login: running
SMB Shares: running
Time ...

I had laying arround a Xtreamer WLAN Stick USB with Realtek RTL8191SU Chip
Standards
IEEE 802.11n (draft 2.0), IEEE 802.11g, IEEE 802.11b, Cisco CCX support, CSMA/CA with ACK

I plugged it, and it worked out of the box with WPA/WPA2!!! :D

lsusb shows --> Bus 001 Device 002: ID 0bda:8172 Realtek ...

After putting a SSD into the DC01 (OCZ Vertex Plus 30GB) in my case, I firstly had to do the Hard Drive Setup as described in the Siverstone DCOI Manual.
I think thats due to the fact that the (OCZ Vertex Plus 30GB) comes unformatted!
Hint --> In my case I was not able to " log in the Silverstone ...

Can we use the existing activation code transfer tools for transforming activation codes to a DC01 system?

e.g. Meteohub Activation Code Transfer Tool (NSLU2 -> x86 & SheevaPlug)
or Meteohub Activation Code Transfer Tool (x86/SheevaPlug -> x86/SheevaPlug) ?

DC01 is not yet mentioned on the ...

Das ist möglich! :D
Mehrere Varianten sind denkbar.
Ich lese mir die Puffer und Solarwerte direkt von meinem Heizungsregler aus und importiere sie via Plugin
über usb in Meteohub. In Anlage die 48h Werte von heute.

Man könnte sich auch vorstellen mit zusätzlichen Sensoren zu arbeiten.
Im Prinzip ...

What about the power consumption in comparison with the good old Sheeva?

@Jos
Thanks for your quick response this might help.

Billy

Hi Jos,
really interesting.
For putting the right sensor in the jar it would be helpful to know which is the max. temperature in the jar.

In addition it might be helpful to see a picture of your "additional JAR sensor".

Thanks in advance
Billy

Due to my request regarding the "Kollektortemperatur" of a heating system it was stepped up by Boris to 130°C.

Billy