meteohub.de

For some reason I didn't notice your replies. Thanks for your information.

I didn't yep tried your solution. What Meteohub version are you using? 5.1d?
Thanks

Hi.

I'm having troubles to configure my meteohub to work with WLAN.
I managed to setup the wlan properly, but for any reason, even restarting with the ethernet cable unplugged the meteohub always starts with the eth0 on and routes configured for eth0.


To make work I always have to shutdown the ...

OK. Found what happened.

The Davis internal datalogger stores 2560 records when logging 1 minute archive interval.

The data logger stores up to 2560 archive records (one 52-byte record per archive interval)for later transfer to your computer. The archive records are stored in 128K
of non ...

Thanks for your update Wim.
Yes the recompute has finished, although I think the recompute is related to aggregate weather data calculations.

2565 records inserted is about, 1 sensor logging 1 minute during 48 hours, and not 41098 gap minutes found by Meteohub. Why meteohub didn't log 28 days of ...

OK, here is the log:

logger (22.12.2013 22:01:46): data logger (version 4.9q, build 6812) started.
logger (22.12.2013 22:01:48): connect station 0 (Vantage via serial).
logger (22.12.2013 22:01:49): station 0 (Vantage), wakeup sent.
logger (22.12.2013 22:01:49): station 0 (Vantage), internal ...

I have a meteohub and a Davis Vantage Vue serial connected.

My meteohub app was down for 30 days. When I started again meteohub the logger started downloading data. After it finished I noticed two things:

1) that meteohub reported all precipitation during that 30 days to the current day.
2 ...

Hi -

I was reading the Meteohub Manual "Apendix C - Format Raw Data".

In the thermo sensor section it says: "pressure (950-1050) [hPa] (or 1/10 hPa when > 5000)" and "sealevel pressure (950-1050) [hPa] (or 1/10 hPa when > 2000)".
Then I looked in the raw file in my Meteohub and I have ...

Meanwihle I edited the raw file and deleted the lines.
Thanks anyway.

Thank you wvdkuil, good ideia, generate the all-sensors file at 23:59.

Hi all!

Where can I get in the all-sensors the Max Wind Gust of yesterday?

For today we have: month1_wind0_gustspeedmax_kn 25.3
But for the previous day? How can I get that info?

The variable: seqday1_wind0_gustspeed_kn , gives the average gust speed for a series of days. But I don't find where ...

My Weather Station was wrongly reporting very low pressure from 10/01/2012 to 22/01/2012. I had deleted the sensor data through the "Inspect Data" option. After I pressed delete I got the "*" mark on all records. Then I ran "Aggregated Weather Data" option. After that I'm still getting the wrong ...

Sorry, I didn't realise the meaning of your last post.

Again...

Looking for seqday1_wind0_gustspeed_kn in my first post I don't find any single value that approaches to 38.8 knts. So where is my mistake? Why Meteohub sent to weatherunderground 72 km/h (~38.8 knts)?

??

By the way, I'm posting because I think that seqday1_wind0_gustspeed_kn refers to the max gust of the day, right? Or is this variable an average of gust winds of the day?

Here is the generated graph:



I checked the dates and everything is OK.