meteohub.de

Hallo ich nutze eine Meteobridge Pro auf einem Raspi. Beim Tab "Grafik definieren" ist mir nicht klar, was das Zeichen "<->" (rechts neben "Achse", siehe Screenshot) bedeutet. Alle anderen Symbole und Abkürzungen sind intuitiv und verständlich. Grüsse aus Basel Thomas

I think the problems started, when I installed the last Windows update. I will try it with the new possibilies in the Administration section.

Thank you.
Thomas

Hi I use Metobridge on Raspberry Pi 3 Model B+, Firmware Meteobridge 6.1 (Dec 13 2024, build 3456), FW 1.3 . Samba-Guests are allowed. "Windows workgroup" is named. Meteobridge is working properly. For a couple of weeks I have no connection to meteobridge directories through the Windows ne...

Yes, I allready updated to version 27.06.2024.
I installed a 4th weatherstation name "Ecowitt custom Upload". Now I get the data into meteobridge. Although now in double and two Air-data are still missing.
Thomas

Addendum:
I deinstalled the corresponding weatherstation in meteobridge and reinstalled it afer a few minutes.
The data from sensor WH46 were not recording. It seems that Ecowitt sensor WH46 is not compatible with meteobridge.

Thomas

Hi I use Meteobridge on a Raspi Pi 3, Model B+, Firmware 17.06.2024, build 3172. My 2nd weather station is a Ecowitt (Model GW1000) and I just added the new sensor WH46 (CO2, etc.). The Ecowitt app is sending data and I can read the results in the Ecowitt App and on the internet https://www.ecowitt....

I just got the Davis Konsole 6313eu. The installation is easy. The display is nice but handling with the data there is relatively slow. Tricky is to get the actual IP and mac adress. I had to use an IP-scanner to get them. At the moment there is no way to get this data from the console directly. Som...

I have 3 weather stations (Weatherflow, Ecowitt and Davis Air Link) connected to my Meteobridge. How can I manage the data which is sent to the different weather networks? Is all the data going to the networks or just the primary station?

Greetings from Basel
Thomas

Hallo
ich wollte nur einen Schreibfehler melden: Administration->Datenbank "automtisches Löchen.."
Gruss
Thomas

Hi there
it would be nice to have a higer time resolution for "Events->Zeitfenster" also.
15 minutes would be enough for my purposes. Regards
Thomas

Hardware: WeatherBoxx mit Meteohub Version 5.1b (Build 7392) Liebe Kollegen seit 2 Tagen ladet Meteohub plötzlich vie FTP keine Bilder (png) mehr zu meiner Webseite hoch. Alle anderen Files (xml, txt, html) werden wie üblich gesendet und empfangen. Die Testmeldung im FTP-Menü wird gesendet und empfa...

Liebe Kolleginnen und Kollegen ich habe einen VantagPro Sensor zur Temperaturmessung in meiner solaren Wasserheizanlage. Die VantagePro2 zeigt auf dem Display 73.3C, doch Meteohub zeigt ab 70.0C immer nur 70 Grad an. Höher gehts nicht, obwohl die Konsole höhere Werte anzeigt. Kann man diese Maximalt...

Dear colleagues I run a Weatherboxx with Meteohub Version 4.9k. My system on Meteohub says now system space "521MB von 755MB belegt (69%)" and data "1725MB von 2756MB belegt (62%)". Is there a possibility to extend the disk volume by using a memory USB-stick on one of the usb por...

Hi I solved the problem. In the XML-File all-sensors.xml the first line should be <?xml version="1.0" encoding="ISO-8859-1" ?>. With this added line, the script above works. Therefore I entered the following code in my sript: $sourceA = fopen('header.txt', 'rb') or die('!fopen A'...

I upgraded from version 4.6t to 4.8a. From then on I got problems in viewing XML-data: Now with "http://192.xxxxx/meteograph.cgi?text=allxml" I can't open the xml-data any more. I get the error message "XML-Verarbeitungsfehler: nicht wohlgeformt ....". I wrote a script to read ou...