meteohub.de

El,

What Meteohub currently get from Davis Equipment, only LOOP dataformat or as well the new LOOP2, which include raw pressure, and how Meteohub will work with that can only be anserd from Boris. To me it looks like the LOOP is used, which seems to report sealevel, and the workaround to get local ...

El,

This oddity appears to be caused by the inability of the Envoy to send a proper console pressure, coupled with the way that Meteohub is interpreting the values sent by the Envoy. In other words, it appears there are two different issues going on. For Meteohub to work correctly, it must have ...

El,

Thinking about this still. If we go on the theory that:
1. the Envoy is only sending one pressure value that is adjusted by setting elevation in the Envoy and
2. if you set the Envoy elevation to zero, you send console pressure (regardless of what Meteohub thinks it really is), and
3. it ...

El,

While we wait for you to look at this again this afternoon, it does look to me as something odd is going on. What I cannot determine is if this oddity is associated only with the Envoy or if it’s a problem when multiple stations are attached.

What I do know is that the sea level pressure ...

El,
When I looked back at this email picture, I see you had selected th0 for your sensor for the Envoy. Should it have been th1 or is this because you still do not have your ISS yet?

You should be able to unplug the WS2300, leave the Envoy attached and then reboot Meteohub. The only available sensors then will be from the Envoy.

El,

You need to also try the Envoy by itself without the other wx station connected to Meteohub.

El,

When you change altitude in Meteohub, do you only change the altitude in Meteohub or do you also change the elevation on the Envoy at the same time?

Do you have any values input into Envoy for station elevation and sea level barometer? If you do, set both of these to zero and see if the ...

El,

I imagine you have the other weather station attached to Meteohub at the same time as the Envoy? Can you also share the data recorded for "actual thb0 height m", "actual thb0 press hpa", "actual thb0 sealevel hpa" during the same time frame as you change altitude?

Have you experimented with ...

El,

When I change altitude in Meteohub to a different value, my actual pressure as recorded by Meteohub does not change, however my sealevel pressure and altimeter change accordingly (as they should).

Here is an easy experiment to do. Set up your station to be at 0 meters altitude in Meteohub ...

Just put 4.9s through the test. It is working well !

Ham radio operators thank you for the fixes.

73
de
N5XL

The APRS wx packet transmission issue (TCPXX vs TCPIP) appears to be fixed. Amateur radio operators running 4.9r build 1204 are now able to have wx packets passed properly on both the CWOP and APRS T1 and T2 servers. From my perspective as a ham, it would be in the spirit of good amateur radio ...

Boris,

I have noticed that when checking on the Maintenance page in Meteohub, version 4.9r continually shows as an available update even though I an running 4.9r. Downloading and installing the update automatically through Meteohub does not change this message, nor does manually installing the ...

Boris, I think you've got the altimeter fixed. Here are my actuals inside Meteohub.
actual_system_version_text 4.9q
actual_system_version_num 49
actual_system_build_num 1187
actual_localdate2 30.09.2012 17:32:38
actual_thb0_press_hpa 917.6
actual_thb0_press_psi 13.31
actual_thb0_press_mmhg 688.2 ...

Yes, it appears you have the first issue with the wrong pressure being transmitted to CWOP.