revisit cannont mount...

and other offical x86 platforms like e-boxes and fitPC

Moderator: Mattk

Post Reply
rhook
Fresh Boarder
Fresh Boarder
Posts: 3
Joined: Fri Jan 29, 2016 12:41 am

revisit cannont mount...

Post by rhook » Fri Jan 29, 2016 12:47 am

I am trying to get meteohub back online after a failed CF card.
Device is an alix.3d.3, tried both v4.9 & v5.0 (same error).
Card is 4gb transcend industrial.
Image written with Win32DiskImage v0.9.5.
Bios: hard disk boot priority = transcend, first boot device = harddrive.
Error message - Mount USB stick as Error: USB stick cannot be mountes as dev/sda or dev/sdb.
What am I missing?
Thanks for any help.

rhook
Fresh Boarder
Fresh Boarder
Posts: 3
Joined: Fri Jan 29, 2016 12:41 am

Re: revisit cannont mount...

Post by rhook » Fri Jan 29, 2016 1:40 am

Yea, I know. Read a little more of the fine print. I was able to extract the image.bin file but I lack the tool (win7-64) to write the image.bin to the cf card. Win32DiskImage doesn't and Suse Studio Writer does not seem to be available anymore. Any suggestions.

rhook
Fresh Boarder
Fresh Boarder
Posts: 3
Joined: Fri Jan 29, 2016 12:41 am

Re: revisit cannont mount...

Post by rhook » Fri Jan 29, 2016 4:55 am

Never mind, I got it.

tinu75
Fresh Boarder
Fresh Boarder
Posts: 14
Joined: Thu Jan 21, 2016 11:49 am

Re: revisit cannont mount...

Post by tinu75 » Wed Feb 03, 2016 1:21 pm

can you please tell us your solution?

Post Reply