bad thb0 sensor data with Ultimeter 800

Moderator: Mattk

Post Reply
on8jl
Fresh Boarder
Fresh Boarder
Posts: 1
Joined: Sat May 05, 2012 10:57 pm

bad thb0 sensor data with Ultimeter 800

Post by on8jl » Sun May 06, 2012 3:05 pm

I have a Peet Ultimeter 800 station. This station has no barometric nor indoor humidity sensor, so thb0 should only contains indoor temperature.

Since upgrade 4.9g, thb0 reports "bad sensor data".

The alarm log displays: "2012.05.06 11:44:07 meteohub: sensorfail: Sensor "thb0 " failed"
The meteohub log displays: "logger (06.05.2012 00:14:55): Bad thb0 sensor data, "pressure x10" (-551) out of range [5000:12000]"
and the sensor page "last signal" value for thb0 displays "never".

I have tried all three supported ultimeter formats without success...

Any hints ?

Post Reply