Error: Finger print of application and system do not match

All about the standard Meteobridge devices based on mobile routers from TP-Link, D-Link, ASUS

Moderator: Mattk

Post Reply
kds
Fresh Boarder
Fresh Boarder
Posts: 18
Joined: Sat Jan 26, 2019 10:13 pm

Error: Finger print of application and system do not match

Post by kds » Sat Jan 26, 2019 10:15 pm

I just went through the setup of a new Meteobridge Nano SD, and I'm receiving the "Error: Finger print of application and system do not match" message on every screen of the web UI. What's causing this? I have accepted the license terms.

Mattk
Platinum Boarder
Platinum Boarder
Posts: 636
Joined: Mon Sep 22, 2014 3:24 am

Re: Error: Finger print of application and system do not match

Post by Mattk » Sat Jan 26, 2019 11:26 pm

That happens when the firmware versions between the Nano and what's on the card are different, do a full reboot

kds
Fresh Boarder
Fresh Boarder
Posts: 18
Joined: Sat Jan 26, 2019 10:13 pm

Re: Error: Finger print of application and system do not match

Post by kds » Sun Jan 27, 2019 12:46 am

Thanks Matt. I've been having some issues with it not coming back up after a full reboot but the error seems to have gone away.

Mattk
Platinum Boarder
Platinum Boarder
Posts: 636
Joined: Mon Sep 22, 2014 3:24 am

Re: Error: Finger print of application and system do not match

Post by Mattk » Sun Jan 27, 2019 1:17 am

With the SD it needs a reboot to pick up the version to support the card, then it needs another reboot to recognize the card, the firmware version showing at the end of the SW version (System tab) should now be FW 1.3, SW version will be relative to your Version control: settings

kds
Fresh Boarder
Fresh Boarder
Posts: 18
Joined: Sat Jan 26, 2019 10:13 pm

Re: Error: Finger print of application and system do not match

Post by kds » Sun Jan 27, 2019 3:37 am

After rebooting several times, the message is back. I'm running Meteobridge 3.9 (Jan 26 2019, build 1918), FW 1.3.

Post Reply