Weather34 MB-SMART NANOSD TEMPLATE

All about the standard Meteobridge devices based on mobile routers from TP-Link, D-Link, ASUS

Moderator: Mattk

PSJohn
Fresh Boarder
Fresh Boarder
Posts: 4
Joined: Thu Aug 29, 2019 7:58 pm

Re: Weather34 MB-SMART NANOSD TEMPLATE

Post by PSJohn » Thu Jan 16, 2020 10:32 pm

weatherist34 wrote:
Wed Jan 15, 2020 6:56 pm
ha ok very sorry I run out of time to push a new update earlier and the program I use for zipping files(Keka) I don't have on my iPad ..anyway update pushed just now 16-01-2020update.zip

http://www.mediafire.com/file/dkrpofq0a ... e.zip/file

it basically is the whole console alternative layout without the console-settings.php file . have fun..
I have a question concerning updates... where do I find what current version of V2.0 I'm using and is there a version history posted somewhere. Is this thread the "official" location to check for updates(the xx-xx-2020update.zip file needed for the updater)?

thanks
https://desertweather.com
Palm Springs, California

https://lakehemetweather.com
Lake Hemet, California

Image

rzelle-K1TTC
Expert Boarder
Expert Boarder
Posts: 133
Joined: Fri Jul 12, 2019 4:32 pm
Contact:

Re: Weather34 MB-SMART NANOSD TEMPLATE

Post by rzelle-K1TTC » Fri Jan 17, 2020 1:12 am

Hi Brian,

Attached is a shot of my iPad Console in a stand I purchased for it. I am also a stickler for not having exposed cables and having a Clean Look so that WhiteThing sticking out of the IPad is being replaced with Black right-angle version to help somewhat in improving the appearance. As far Skeuomorphism your efforts are working my partner is using the Console she's commenting positively on the appearance and has stopped asking me about the current conditions .. :-)
When you have a minute I would like to know where you purchased the inexpensive Android Tablets. OK if you want to respond to my email address.

Lot's of 73s

.. Ron
IMG_4792a.jpg
IMG_4792a.jpg (356.25 KiB) Viewed 679 times

oturn
Fresh Boarder
Fresh Boarder
Posts: 12
Joined: Fri Dec 21, 2018 1:49 am

Re: Weather34 MB-SMART NANOSD TEMPLATE

Post by oturn » Mon Jan 20, 2020 5:32 am

Is this available as a second dashboard on the Nano SD yet, or are we still waiting?

weatherist34
Platinum Boarder
Platinum Boarder
Posts: 382
Joined: Tue Mar 28, 2017 6:57 am
Contact:

Re: Weather34 MB-SMART NANOSD TEMPLATE

Post by weatherist34 » Mon Jan 20, 2020 9:38 am

oturn wrote:
Mon Jan 20, 2020 5:32 am
Is this available as a second dashboard on the Nano SD yet, or are we still waiting?
Hello unfortunately its not something I can answer this is done at firmware release level so best contact Boris .

*Update for Pressure css graphic module

Extends range of barometer 935-1055(hpa/mb) & 27.5-31.5(in) caters for extreme high pressure as seen in UK currently(20th Jan 2020).
https://weather34.com/homeweatherstatio ... smart.html
* the main full download is always automatically or simultaneously updated when smart update is released.

or use a GITHUB app to pull updates, GITHUB offers a full history log and code changes with highlights of actual code changes.
https://github.com/weather34/Meteobridge-MB-SMART

best place to monitor for updates is via https://weather34.com/homeweatherstatio ... smart.html or GITHUB
this thread is primarily for discussing issues or if you get into the habit of using GITHUB you can raise issues directly there and push code ideas via the ISSUES tab via https://github.com/weather34/Meteobridg ... ART/issues


Screenshot at Jan 20 11-01-06.png
Screenshot at Jan 20 11-01-06.png (287.52 KiB) Viewed 441 times

garybridge
Fresh Boarder
Fresh Boarder
Posts: 7
Joined: Tue Nov 05, 2019 7:04 pm

Re: Weather34 MB-SMART NANOSD TEMPLATE

Post by garybridge » Mon Jan 20, 2020 10:30 am

Thank you for the clarification that main download was updated automatically to the latest version.
This is a useful Get Out of Jail card for me as for some reason some parts of the template didn’t update correctly.

Regards

geoair
Junior Boarder
Junior Boarder
Posts: 28
Joined: Fri Sep 16, 2011 5:25 pm

Re: Weather34 MB-SMART NANOSD TEMPLATE

Post by geoair » Mon Jan 20, 2020 1:40 pm

weatherist34 wrote:
Mon Jan 13, 2020 4:04 pm
geoair wrote:
Mon Jan 13, 2020 2:51 pm
Hi all,
Is there a way to reset the settings password on a Meteobridge NanoSD(4.2-2795)?
Thank you
do you mean on the meteobridge NANOSD itself ?
Hi,
I'm referring to the weather34 settings console:
Screenshot_1.jpg
Screenshot_1.jpg (431.51 KiB) Viewed 425 times
~
I need to adjust the time zone on my setup, and for some reason I cannot access the settings page with the password I think I've defined.
Best regards.

weatherist34
Platinum Boarder
Platinum Boarder
Posts: 382
Joined: Tue Mar 28, 2017 6:57 am
Contact:

Re: Weather34 MB-SMART NANOSD TEMPLATE

Post by weatherist34 » Mon Jan 20, 2020 2:23 pm

hello by default there is no password just hit enter however if you forgot password you set then perhaps contact Boris for clarification on procedure
to reset password as in above post the in built version I have no access to publicly and any changes I guess are a firmware release level.


on another subject ive posted below a clear example the benefit of using a GITHUB app to follow updates they are available in many flavors for all OS Mac,windows etc just have to find and use one that suits your needs . You can see it automatically lists all changes in history and code

I use the standard default GITHUB Mac OS version .
githubapp.jpg
githubapp.jpg (143.02 KiB) Viewed 423 times

weatherist34
Platinum Boarder
Platinum Boarder
Posts: 382
Joined: Tue Mar 28, 2017 6:57 am
Contact:

Re: Weather34 MB-SMART NANOSD TEMPLATE

Post by weatherist34 » Tue Jan 21, 2020 10:30 am

I have been asked a few times in recent months does template support or work with Brotli ?

Brotli support ?
Answer. Yes weather34.com uses Brotli and has done for a few months , it offers advantages over the popular existing common GZIP approach. It is not a case of whether the template supports its a feature enabled at server level by your host .ICDSOFT hosting offers this and is enabled by default on their servers. The difference is negligible and would hardly be noticed by any visitors but for those who like to have their sites using the latest feature or being one step ahead then a google search on enabling Brotli via your servers root htaccess will return many results but be safe and contact your hosting technical support.

for those interested
https://www.interserver.net/tips/kb/bro ... tter-gzip/

xxvincixx
Junior Boarder
Junior Boarder
Posts: 38
Joined: Fri Apr 19, 2019 2:32 pm

Re: Weather34 MB-SMART NANOSD TEMPLATE

Post by xxvincixx » Tue Jan 21, 2020 7:31 pm

weatherist34 wrote:
Tue Jan 21, 2020 10:30 am
I have been asked a few times in recent months does template support or work with Brotli ?

Brotli support ?
Answer. Yes weather34.com uses Brotli and has done for a few months , it offers advantages over the popular existing common GZIP approach. It is not a case of whether the template supports its a feature enabled at server level by your host .ICDSOFT hosting offers this and is enabled by default on their servers. The difference is negligible and would hardly be noticed by any visitors but for those who like to have their sites using the latest feature or being one step ahead then a google search on enabling Brotli via your servers root htaccess will return many results but be safe and contact your hosting technical support.

for those interested
https://www.interserver.net/tips/kb/bro ... tter-gzip/
hello Brian, would it be possible (in the alternative console) to change the positioning of mm of rain per day ??? they are the only data that can be read little because of its small character ... perhaps removing it "from the water" or decreasing the size of the tray to allow you to enlarge the characters of the daily mm .... thanks :) :) :)

weatherist34
Platinum Boarder
Platinum Boarder
Posts: 382
Joined: Tue Mar 28, 2017 6:57 am
Contact:

Re: Weather34 MB-SMART NANOSD TEMPLATE

Post by weatherist34 » Wed Jan 22, 2020 10:34 am

think Im understanding so I changed it to this simply moving the unit above and increased font size a wee bit and increase today rainfall value font size . If not I don't think its a critical thing to spend to much time on but I do appreciate the feedback and try to cater for most ideas thrown around.
rainfont.jpg
rainfont.jpg (70.78 KiB) Viewed 339 times

weatherist34
Platinum Boarder
Platinum Boarder
Posts: 382
Joined: Tue Mar 28, 2017 6:57 am
Contact:

Re: Weather34 MB-SMART NANOSD TEMPLATE

Post by weatherist34 » Wed Jan 22, 2020 3:03 pm

I have a growing number of emails this morning/afternoon and it seems these are all related to Meteobridge Pro after firmware 4.3 , I have cross checked everything and 100% nothing changed in how the template handles the data sent from Meteobridge . in fact the file that does that is the same has it was in 2018 that file mb.php .

The template only displays what is sent from the Meteobridge API !! it doesn't do anything and can't control meteobridge hardware in anyway.
All these issues have arisen only on Meteobridge Pro using firmware 4.3 . cross checked all known NANOSD users using firmware 4.3 and there are no issues or similar to what I m getting in emails .

issues raised with Meteobridge Pro

1.no console Davis forecast data sent from Meteobridge
2.Incomplete data sets example below you can see its stopped at almost CARAMBOLA2 and missing two thirds of the data set
CARAMBOLA2 is the MB pro identifier

Code: Select all

22/01/2020 11:55:45 5.3 97.0 4.9 0.0 0.0 47.0 0.0 0.0 1034.9 47.0 0 m/s C hPa mm 0.0 1035.0 79.8 79.8 0.0 17.0 53.0 5.3 4.4 5.3 20200122114818 -2.2 20200122013338 0.3 20200122101702 1.4 20200122085509 1039.0 20200122110143 1026.8 20200122080939 4.3 13331 0.5 CARAMBOLA2 -- -- 0.0 [
here is another MB pro output with 4.3 firmware with NO console forecast data but with all the dataset

Code: Select all

22/01/2020 14:08:30 6.9 69.0 1.6 1.7 1.4 213.0 0.0 0.0 1030.5 213.0 1 m/s C hPa mm 1.7 1031.6 16.3 16.3 0.0 36.2 21.0 6.2 6.8 7.3 20200122133919 -2.6 20200122080642 2.8 20200122134159 3.3 20200122134017 1036.6 20200122000501 1030.5 20200122140321 4.3 13331 2.8 CARAMBOLA2 -- 0.4 0.0 178.0 209.0 0.0 6.7 20200102140912 -4.7 20200107070236 0.5 20200121153734 6.7 20200102140912 -4.7 20200107070236 0.7 95.0 20200122090427 64.0 20200122131118 2.4 20200122133919 -3.7 20200122080642 7.2 68.0 1.7 36.2 21 1.6 1.8 -- -- -- -- -- -- 441.0 258732 9.2 20200121133435 -2.9 20200121075102 13.3 20200111142849 -3.9 20200107070236 13.3 20200111142849 -3.9 20200107070236 2.8 20200121122618 7.6 20200120181126 7.6 20200120181126 0.0 16.3 20200101000004 16.3 20200103094942 441.0 20200122124142 410.0 20200121120958 441.0 20200122124142 441.0 20200122124142 20200122113658 0.8 20200121115355 0.8 20200112115845 0.8 20200112115845 -4.2 20200121073600 8 6.9 -- 19.8 20191125134038 -3.9 20200107070236 15.7 20191105132115 -6.2 20191211124551 19.5 20191112231426 1043.2 20200121000127 1036.5 20200121235302 1043.3 20200120232526 1019.0 20200104205837 1043.3 20200120232526 1019.0 20200104205837 1043.3 20200120232526 982.6 20191213164455 1214.1 1.0 7 5.7 09:20 05:49 14:43 0.3 97.0 20200103104714 43.0 20200120135801 97.0 20200103104714 43.0 20200120135801 94.0 20200121090856 49.0 20200121133851 0.0 0.0 107.3 1197.8 -- 6.7 1030.7 0.4 1.7 232.8 1.1 0.0 67.4 2.4 0.6 20191028204918 20191028203245 20191028184103 20191001000000 20200101000004 316.0 13.3 20200111142849 -7.0 20200108061317 _
Now with a NANOSD with firmware 4.3 below you can see its three times as much data and forecast is present and is labeled VOCORE2

Code: Select all

22/01/2020 12:43:16 7.6 97.0 7.2 0.4 0.0 358.0 0.0 0.2 1037.6 358.0 0 m/s C hPa mm 0.2 1038.0 63.0 63.0 0.2 17.6 38.0 7.6 6.3 7.6 20200122123738 1.1 20200122000027 0.4 20200122044410 1.3 20200122120636 1040.3 20200122000412 1037.6 20200122062512 4.3 2808 0.9 VOCORE2 -- -- 0.4 104.0 358.0 0.0 12.1 20200114132412 -3.1 20200119075704 4.8 20200121140034 12.1 20200114132412 -3.1 20200119075704 -- 97.0 20200122115042 94.0 20200122000027 7.2 20200122124038 0.2 20200122000027 7.4 96.0 6.8 17.6 38 0.2 0.2 -- -- -- -- -- -- 135.0 304132 7.5 20200121151502 -2.1 20200121074818 14.1 20200114144340 -2.3 20200119075644 14.1 20200114144340 -2.3 20200119075644 1.8 20200121132446 15.6 20200113173456 15.6 20200113173456 0.2 63.0 20200101000011 63.0 20200113180548 135.0 20200122120902 260.0 20200121123610 360.0 20200112123543 360.0 20200112123543 -- -- -- -- -- -- -- -2.8 20200121074818 0 7.1 20200122045902 33.7 20180727160000 -6.1 20190203073130 21.6 20190629125639 -7.2 20190203073130 20.1 20190207022510 1044.8 20200121000011 1040.2 20200121203912 1049.7 20200120020809 988.9 20200114130912 1049.7 20200120020809 988.9 20200114130912 1049.7 20200120020809 968.9 20191221195916 1534.4 3.2 7 5.9 08:40 06:15 14:15 0.0 97.0 20200122115042 70.0 20200103152043 97.0 20200122115042 70.0 20200103152043 96.0 20200121094822 81.0 20200121152226 0.0 0.0 118.4 791.8 -- 7.5 1037.7 -- 0.4 102.3 7.1 0.0 96.6 7.1 1.8 20180206040000 20180214040000 20180805020000 20180602010000 20200101000011 247.0 14.1 20200114144340 -3.6 20200119061556 _Partly cloudy with little temperature change.
I have emailed Boris to try and resolve or get some insight but these issues are NOT apparent on NANOSD hardware with 4.3

xxvincixx
Junior Boarder
Junior Boarder
Posts: 38
Joined: Fri Apr 19, 2019 2:32 pm

Re: Weather34 MB-SMART NANOSD TEMPLATE

Post by xxvincixx » Wed Jan 22, 2020 6:57 pm

weatherist34 wrote:
Wed Jan 22, 2020 10:34 am
think Im understanding so I changed it to this simply moving the unit above and increased font size a wee bit and increase today rainfall value font size . If not I don't think its a critical thing to spend to much time on but I do appreciate the feedback and try to cater for most ideas thrown around.

rainfont.jpg
thanks brian, so it is already much better .. :D :D :D

one last thing, you could try to set the font in black/dark grey, instead of white..I think it would look even better and would be more in contrast with the blue water .. obviously mine are just tips and feedback ,thanks for your hard work :) :) :)

alexeysailman
Fresh Boarder
Fresh Boarder
Posts: 5
Joined: Sun Mar 03, 2019 8:12 pm

Re: Weather34 MB-SMART NANOSD TEMPLATE

Post by alexeysailman » Thu Jan 23, 2020 9:42 am

Hi Brian.
Need your advice please.
I've already rechecked many times according to your instructions https://weather34.com/homeweatherstatio ... setup.html my settings. But statistics for the day are not saved. For example, it has been three days since the start of work, but the average daily values remained for the first day, and then there is a void.
Attachments
services.GIF
services.GIF (58.3 KiB) Viewed 274 times

weatherist34
Platinum Boarder
Platinum Boarder
Posts: 382
Joined: Tue Mar 28, 2017 6:57 am
Contact:

Re: Weather34 MB-SMART NANOSD TEMPLATE

Post by weatherist34 » Thu Jan 23, 2020 10:25 am

hello

that is one mind-blowing url :-)

however I have just run the url for charts-month-year.php through the browser you will see it created data for 23rd Jan in month and year .
so check there are no hidden whitespaces at the end of the url in the charts-month-year at 23:45 . also click the test button to confirm it is running.
doing exactly the same from a browser creates updated data. thats all I can think of

alexeysailman
Fresh Boarder
Fresh Boarder
Posts: 5
Joined: Sun Mar 03, 2019 8:12 pm

Re: Weather34 MB-SMART NANOSD TEMPLATE

Post by alexeysailman » Thu Jan 23, 2020 12:06 pm

As i understand, after runing the url for charts-month-year.php through the browser it turns out such as in the picture, this story can be removed somehow?
Attachments
pic.JPG
pic.JPG (143.81 KiB) Viewed 265 times

Post Reply