WL CLoud network support in Version 4.2

[superduty]

As some of the Meteobridge users here in the forum are deep into IT, I try to mention at least what kind of change I did. Please ignore when it is not making sense to you.

I fully recognize that and appreciate it. I was trying to be funny. I am always impressed by the level of knowledge many folks here have with regards to IT and how all this stuff actually works.

Again, thank you for your dedication and super quick responses to issues.

[gand]

Hi

I don't know if this is the right place, but now I try otherwise Admin must advise.

I've installed upload to Weatherlink via Meteobridge and it works really well. I also installed the IOS Davis Weatherlink App and it works fine too. The only thing that seems strange is Windgust, which seems pretty high!!

Are there any others who have installed the Davis IOS App and have problems with Wind Gust?

Any good advice where to start looking for this issue?

Thanks

Rgds
Gert

[lightmaster]

Hi

I don't know if this is the right place, but now I try otherwise Admin must advise.

I've installed upload to Weatherlink via Meteobridge and it works really well. I also installed the IOS Davis Weatherlink App and it works fine too. The only thing that seems strange is Windgust, which seems pretty high!!

Are there any others who have installed the Davis IOS App and have problems with Wind Gust?

Any good advice where to start looking for this issue?

Thanks

Rgds
Gert

That's not normal for you??

I'll install the app on my iPad tomorrow and see how it looks for me. Question: How does it look on their website?

[gand]

Hi

Screenshot for the Summary. Strange Windgust as well

Gert

[meteolive57290]

actually it's not bad
no worries from my side about the corresponding bulletin_summary and app mobile IOS version 2.1.6 (217)
https://www.weatherlink.com/embeddableP ... d1/summary

which version of the application do you use ?

[admin]

Bug does only affect Davis consoles with old firmware that does not support LOOP2 packets. It should be fixed with just released update.

[gand]

Hi

I have rebooted to the latest version and it's much better now, but still to high (or maybe there is an explanation)

In the summary I have 21.9 m/s gust. I can't recognise that figure from Meteobridge.

Rgds
Gert

[admin]

Should be fine with just released fix.
@gand: Did update your MB and it now shows a 10 min gust around 1-2 m/s on WL.

[gand]

Hi Boris

Thanks for your hard work, seems to work perfect now.

BTW, as soon as I'm close to the weatherstation (300 km away), I'll upgrade the firmware.

Rgds
Gert

[gand]

Hi

Hi

I have a question regarding rain. In the Weatherlink Bulletin the current rainfall shows 2.6 mm. If I look at the graph/data it shows 2.2mm (11 marks). In the data part there are also only 11 marks, each with 0.2mm. My console shows 2.6mm. Same thing with the Davis IOS app.

Is this a failure from the upload from MB or is it a bug in WL?

Any ideas?

I have upgraded the console to FM 3.80 using Loop2 packets.

Screenshots attached.

Rgds
Gert

[meteolive57290]

Hello
i have another problem on my side with my WWL device and the recording of the rain live ... most certainly a bug in reading the code that manages WLL precipitation!
3.4 mm recorded by my station against the 310.6 mm for the WWL

rain-live WWL

IMG-1759-tile.jpg (166.39 KiB) Viewed 1726 times

on the other hand no problem for my MB-pro and the report properly recorded and reported for example on the template WD34
http://valdefench57sgz.franceserv.com/pws/index.php

[admin]

What kind of rain data does the Meteonbridge show, when it reads data from the WLL?

[lightmaster]

Here is the monthly and yearly rain data from my NanoSD:


This is what WL.com has for rain:


On WL.com, the table's monthly rain and the charts monthly rain don't agree, and neither match the MB's data. Yearly rain with WL.com doesn't match MB.

[gand]

hI

For my part MB and WL match pretty good, only a couple of mm for yearly rain. Graphs and records(WL) for rain don't not match MB. Wind and temp match MB. Pretty odd.

I'm using
Meteobridge 4.2 (Nov 18 2019, build 2666), FW 1.3
TL-MR3020V3 (no USB hub)

Rgds
Gert

[meteolive57290]

What kind of rain data does the Meteonbridge show, when it reads data from the WLL?

@Boris

MB is monitoring with WL-IP from my main station
for me no worries in recording rain
it's my WWLive (application and web) that records completely inconsistent reports
while if I take my station singularly everything is correctly recorded
here is the answer I received from Davis (after my first report that goes back to May and the replacement of the device)

rain_WWL

IMG-1768-vert.jpg (478.5 KiB) Viewed 1690 times

response Davis

dvis.PNG (19.2 KiB) Viewed 1690 times