Weather34 Aurora Version(english supported only)

All about the standard Meteobridge devices based on mobile routers from TP-Link, D-Link, ASUS

Moderator: Mattk

Locked
User avatar
rzelle-K1TTC
Gold Boarder
Gold Boarder
Posts: 226
Joined: Fri Jul 12, 2019 4:32 pm

Re: Weather34 Aurora Version(english supported only)

Post by rzelle-K1TTC »

Hi Brian,

OK I ran setup added elevation and utc offset values and all is well after saving. I don't know how those 2 values went missing. :-)

73s

..Ron
https://weather.k1ttc.com/AuroraMKII/index.php
W. Methuen, Ma 01844 - Davis VP2+ - PurpleAir
User avatar
prestwickwx
Platinum Boarder
Platinum Boarder
Posts: 508
Joined: Sat Aug 23, 2014 3:28 pm
Location: Myrtle Beach, SC USA
Contact:

Re: Weather34 Aurora Version(english supported only)

Post by prestwickwx »

Brian/Ron,

I just updated and set the elevation and UV/Solar choice and everything looks OK.

Brian - I have noticed that the "Use Operating System Automatic Theme (Dark/Light Mode if supported)" in Setup is not Sticky. It reverts to yes each time you open the Setup.

Take care,

Chuck
Image
https://myrtleweather.com/
Myrtle Beach WX @ Prestwick
User avatar
Bart
Expert Boarder
Expert Boarder
Posts: 82
Joined: Fri Nov 20, 2020 12:08 am
Contact:

Re: Weather34 Aurora Version(english supported only)

Post by Bart »

Hello,
You may think I'm in grave danger. But that's okay. It's still going well here. My Davis is about 4.6 meters below sea level. That's -15.1 ft. Before I update. Is a minus sign ok in this new field? I don't want to go blank. The clouds don't come any closer and the sun not warmer. :shock:
Bart
weatherist34
Platinum Boarder
Platinum Boarder
Posts: 1425
Joined: Tue Mar 28, 2017 6:57 am

Re: Weather34 Aurora Version(english supported only)

Post by weatherist34 »

Bart wrote: Tue Nov 16, 2021 6:21 pm Hello,
You may think I'm in grave danger. But that's okay. It's still going well here. My Davis is about 4.6 meters below sea level. That's -15.1 ft. Before I update. Is a minus sign ok in this new field? I don't want to go blank. The clouds don't come any closer and the sun not warmer. :shock:
Bart
Hello Bart I just tried it at -20 feet returned no problems but then again I didn't have any issues originally and I couldn't reproduce the error unless I locked permissions but I don't think that was the issue kind of leaning towards conflict in PHP 7 because all sites I tried were PHP 8 but I can't confirm this .

@Chuck corrected the return value expected , though if you choose NO/YES that's what is stored in the settings file just a minor missing piece of code that returns the stored value in the setup screen only.(does that make sense?? :-) )

Bart Download was just updated with some minor fixes/workarounds

Change Log 16th November 2021

* (19:37) * Contains all features/fixes from Oct 1st to Nov 16th
* (19:37) * Important new options below require to be set
* (19:37) * Corrects theme display setup option returned value (Ref Chuck)
* (19:37) * Workaround elevation setup option not sticking *PHP 7.X ?? (Ref Ron)
* (19:37) * Adds requested numerical bearing in compass (Ref Ryan)
* (19:37) * Adds new setup screen option to set elevation (Ref Josep)
* (19:37) * Adds new setup screen option to set 9th position module (Ref Lorenzo)

** Please always do a backup before applying updates.
Doing backups will preserve your chart data and settings in the event of any problems.
When new setup options are added ensure the settings file(console-settings)
is not locked with file permissions on your server !!.


good night and have a good week ahead Im off again for a week or so tomorrow afternoon..Brian
User avatar
prestwickwx
Platinum Boarder
Platinum Boarder
Posts: 508
Joined: Sat Aug 23, 2014 3:28 pm
Location: Myrtle Beach, SC USA
Contact:

Re: Weather34 Aurora Version(english supported only)

Post by prestwickwx »

weatherist34 wrote: Tue Nov 16, 2021 6:46 pm
Bart wrote: Tue Nov 16, 2021 6:21 pm Hello,
You may think I'm in grave danger. But that's okay. It's still going well here. My Davis is about 4.6 meters below sea level. That's -15.1 ft. Before I update. Is a minus sign ok in this new field? I don't want to go blank. The clouds don't come any closer and the sun not warmer. :shock:
Bart
Hello Bart I just tried it at -20 feet returned no problems but then again I didn't have any issues originally and I couldn't reproduce the error unless I locked permissions but I don't think that was the issue kind of leaning towards conflict in PHP 7 because all sites I tried were PHP 8 but I can't confirm this .

@Chuck corrected the return value expected , though if you choose NO/YES that's what is stored in the settings file just a minor missing piece of code that returns the stored value in the setup screen only.(does that make sense?? :-) )

Bart Download was just updated with some minor fixes/workarounds

Change Log 16th November 2021

* (19:37) * Contains all features/fixes from Oct 1st to Nov 16th
* (19:37) * Important new options below require to be set
* (19:37) * Corrects theme display setup option returned value (Ref Chuck)
* (19:37) * Workaround elevation setup option not sticking *PHP 7.X ?? (Ref Ron)
* (19:37) * Adds requested numerical bearing in compass (Ref Ryan)
* (19:37) * Adds new setup screen option to set elevation (Ref Josep)
* (19:37) * Adds new setup screen option to set 9th position module (Ref Lorenzo)

** Please always do a backup before applying updates.
Doing backups will preserve your chart data and settings in the event of any problems.
When new setup options are added ensure the settings file(console-settings)
is not locked with file permissions on your server !!.


good night and have a good week ahead Im off again for a week or so tomorrow afternoon..Brian
Brian,

All fixed. Makes perfect sense :D

Take care,

Chuck
Image
https://myrtleweather.com/
Myrtle Beach WX @ Prestwick
lorenz1982
Senior Boarder
Senior Boarder
Posts: 67
Joined: Thu Apr 24, 2014 2:34 pm
Location: Trento / Trient - Northern Italy
Contact:

Re: Weather34 Aurora Version(english supported only)

Post by lorenz1982 »

Hello.
Just a little thing.
Low radiation and moderate radiation have the same color.
Thanks.
Attachments
Immagine.png
Immagine.png (58.5 KiB) Viewed 522 times
User avatar
prestwickwx
Platinum Boarder
Platinum Boarder
Posts: 508
Joined: Sat Aug 23, 2014 3:28 pm
Location: Myrtle Beach, SC USA
Contact:

Re: Weather34 Aurora Version(english supported only)

Post by prestwickwx »

Brian,

The Value Definitions are a great addition. :D

Thanks,

Chuck
Image
https://myrtleweather.com/
Myrtle Beach WX @ Prestwick
weatherist34
Platinum Boarder
Platinum Boarder
Posts: 1425
Joined: Tue Mar 28, 2017 6:57 am

Re: Weather34 Aurora Version(english supported only)

Post by weatherist34 »

lorenz1982 wrote: Wed Nov 17, 2021 4:27 pm Hello.
Just a little thing.
Low radiation and moderate radiation have the same color.
Thanks.
Lorenzo

threshold is 1-600 yellow 600 to 799 orange , 800+ to red im not aware of an official solar radiation color scale to use .

@chuck glad you like it I had some minor teething issue with purple air but should be ok now , note the CO2 was removed I have a bunch emails last few weeks all indications its stuck on 25 , whilst not a template issue but hardware so I switched the position reading to show PM10.

Still yet to install mine still need to route a power cable under the lawn ..anyway that's it from me for a few weeks got a plane to catch ..take care all


Change Log 17th November 2021

* (15:52) * Contains all features/fixes from Oct 1st to Nov 17th
* (15:52) * Important new options below require to be set
* (15:52) * Important please double check the elevation is stored in setup
* (15:52) * Corrects Purple Air falling trend arrow Ref Luke
* (14:22) * Adds clear description to top left hand module values
* (14:22) * Formats to single digit rain today if rain today is 0 (Ref Ryan)
* (14:22) * Adds requested numerical bearing in compass (Ref Ryan)
* (14:22) * Adds new setup screen option to set elevation (Ref Josep)
* (14:22) * Adds new setup screen option to set 9th position (Ref Lorenzo)

** Important please double check the elevation is stored in setup screen
and the new UV/Solar/Clock option is set.
** Please always do a backup before applying updates.
Doing backups will preserve your chart data and settings in the event of
any problems.
When new setup options are added ensure the settings file(console-settings)
is not locked with file permissions on your server.

PM10.png
PM10.png (26.85 KiB) Viewed 508 times
weatherist34
Platinum Boarder
Platinum Boarder
Posts: 1425
Joined: Tue Mar 28, 2017 6:57 am

Re: Weather34 Aurora Version(english supported only)

Post by weatherist34 »

@all

the OS Theme with chart view template should now resemble this(screenshot below) , note the the top left values have been reworked to cater for description .use this to compare with your own to see if you have latest version . have a great week..Brian (ps yes the earthquake tremor today was strong and shook building but not significant to cause damage but a friendly reminder I live near an active fault line :-( )





newos.png
newos.png (188.56 KiB) Viewed 502 times
User avatar
prestwickwx
Platinum Boarder
Platinum Boarder
Posts: 508
Joined: Sat Aug 23, 2014 3:28 pm
Location: Myrtle Beach, SC USA
Contact:

Re: Weather34 Aurora Version(english supported only)

Post by prestwickwx »

Hi Brian,

Yes, I noticed the VOC change. No problem its still in the chart - mine has not had any issues with the 25 reading, seems to be working fine.

Take care,

Chuck
Image
https://myrtleweather.com/
Myrtle Beach WX @ Prestwick
User avatar
jmontamat
Gold Boarder
Gold Boarder
Posts: 193
Joined: Tue Sep 09, 2014 4:49 pm
Location: Barcelona Spain
Contact:

Re: Weather34 Aurora Version(english supported only)

Post by jmontamat »

Good morning, overflow in the alt theme.

Thanks.
Attachments
Sin título.png
Sin título.png (14.17 KiB) Viewed 465 times
weatherist34
Platinum Boarder
Platinum Boarder
Posts: 1425
Joined: Tue Mar 28, 2017 6:57 am

Re: Weather34 Aurora Version(english supported only)

Post by weatherist34 »

jmontamat wrote: Thu Nov 18, 2021 10:45 am Good morning, overflow in the alt theme.

Thanks.
Hello Josep

I didn't have enough to time to complete this yesterday but ALT theme will be removed as the OS themes will show identical max,min,avg data as shown below . But not sure when I can get this finished need to do the air quality modules but below shows what it will look like . so Im not going to fix that issue you raised . This layout is based on numerous requests over the last few weeks to show max,min,avg alongside graph display dashboard layout and this layout will have the option to set the module positions like in main dashboard.as above don't have time at present and neither do I have a reliable internet connection so not going to take the risk of failed uploads.
below shows the max.min.avg data boxes layout alongside the graphs.


ost.png
ost.png (205.89 KiB) Viewed 456 times
User avatar
jmontamat
Gold Boarder
Gold Boarder
Posts: 193
Joined: Tue Sep 09, 2014 4:49 pm
Location: Barcelona Spain
Contact:

Re: Weather34 Aurora Version(english supported only)

Post by jmontamat »

well i like :D
weatherist34
Platinum Boarder
Platinum Boarder
Posts: 1425
Joined: Tue Mar 28, 2017 6:57 am

Re: Weather34 Aurora Version(english supported only)

Post by weatherist34 »

jmontamat wrote: Thu Nov 18, 2021 2:33 pm well i like :D
I thought you might :-) im listening just takes time to find the balance and a position that doesn't screw the design... and a reliable internet .. so progress purple air done just need to do luftdaten,airlink ..and I didnt forget mmHG :-)



ost34.png
ost34.png (205.64 KiB) Viewed 437 times
woolfg
Expert Boarder
Expert Boarder
Posts: 127
Joined: Wed Mar 20, 2019 4:01 pm
Contact:

Re: Weather34 Aurora Version(english supported only)

Post by woolfg »

Hi Brian

Posted in error
Locked