Nano SD: clientraw and graphing issues **solved**

This section covers the Meteobridge PRO units exclusively

Moderator: Mattk

Post Reply
thunderstorm
Fresh Boarder
Fresh Boarder
Posts: 7
Joined: Sun Mar 31, 2019 11:00 am

Nano SD: clientraw and graphing issues **solved**

Post by thunderstorm » Thu Sep 05, 2019 5:16 pm

After rebooting and switching to 4.1 (Sep 4 2019, build 2407) , my clientraw exports stop working and opening the local charts results into 'bad gateway" errors. My last update was 7 days ago, so it could be any version in between...

Any hints on debugging this ?

Wingfat
Fresh Boarder
Fresh Boarder
Posts: 12
Joined: Sun Oct 08, 2017 10:32 pm

Re: Nano SD: clientraw and graphing issues

Post by Wingfat » Sat Sep 07, 2019 3:47 am

Got the same problem... was working fine.
Attachments
Screen Shot 2019-09-06 at 9.53.15 PM.jpg
Screen Shot 2019-09-06 at 9.53.15 PM.jpg (103.65 KiB) Viewed 301 times
Screen Shot 2019-09-06 at 9.50.24 PM.jpg
Screen Shot 2019-09-06 at 9.50.24 PM.jpg (218.24 KiB) Viewed 301 times

User avatar
admin
Platinum Boarder
Platinum Boarder
Posts: 5829
Joined: Mon Oct 01, 2007 10:51 pm

Re: Nano SD: clientraw and graphing issues

Post by admin » Sun Sep 08, 2019 12:11 pm

Sorry, that was a glitch in the update released yesterday. Please reboot to have the newest version loaded, where it should work fine again.

thunderstorm
Fresh Boarder
Fresh Boarder
Posts: 7
Joined: Sun Mar 31, 2019 11:00 am

Re: Nano SD: clientraw and graphing issues **solved**

Post by thunderstorm » Sun Sep 08, 2019 12:13 pm

Thanks works again with build 2422 (Sep 8 2019)

Wingfat
Fresh Boarder
Fresh Boarder
Posts: 12
Joined: Sun Oct 08, 2017 10:32 pm

Re: Nano SD: clientraw and graphing issues **solved**

Post by Wingfat » Mon Sep 09, 2019 12:06 am

Thank You.... <Solved>

Post Reply