MB restarts when a backup is made

This section covers the Meteobridge PRO units exclusively

Moderator: Mattk

Post Reply
BeBe
Junior Boarder
Junior Boarder
Posts: 21
Joined: Fri Feb 12, 2016 6:36 pm
Location: Grou
Contact:

MB restarts when a backup is made

Post by BeBe » Sun Dec 30, 2018 12:33 pm

Hi,

When I do a backup the Meteobridghe Pro often makes a spontaneous reboot without making a backup. Sometimes the backup works well, both manually and periodically.
I activated the script to do a back-up each new day.
Schermafbeelding 2018-12-30 om 09.05.34.jpg
Schermafbeelding 2018-12-30 om 09.05.34.jpg (30.74 KiB) Viewed 185 times
Log:
oled (28.12.2018 23:02:15): process started.
database (30.12.2018 00:01:54): process started.
database (30.12.2018 00:01:54): Content of RAM database restored.
database (30.12.2018 00:01:54): database sync done (0 tables, 0/0 writes).
wnetd (30.12.2018 00:01:57): process started.
system (30.12.2018 00:01:57): start of logging process initiated.
logger (30.12.2018 00:01:57): databases connected. Update interval 3600 seconds.
logger (30.12.2018 00:01:57): data logger (version 5.1a, build 12614) started.
logger (30.12.2018 00:01:59): connect station 0 (Meteostick Vantage via USB serial).
logger (30.12.2018 00:01:59): connect station 9 (System Data via Plug-in).
logger (30.12.2018 00:02:02): waiting for sensors (wind0, rain0, th0, thb0) to provide data.
logger (30.12.2018 00:02:02): services paused.
logger (30.12.2018 00:02:03): transmitter 1 registered as ISS
logger (30.12.2018 00:02:03): transmitter 2 registered as Wind
logger (30.12.2018 00:02:03): transmitter 3 registered as Temperature
logger (30.12.2018 00:02:03): transmitter 4 registered as Temperature
logger (30.12.2018 00:02:03): Meteostick Version 2.5.1
logger (30.12.2018 00:02:03): debug off
logger (30.12.2018 00:02:03): verbose off
logger (30.12.2018 00:02:03): output raw (8 bytes)
logger (30.12.2018 00:02:03): output raw (10 bytes)
logger (30.12.2018 00:02:03): filter on
logger (30.12.2018 00:02:04): rx threshold set to -90db
logger (30.12.2018 00:02:04): listening to transmitter 1 2 3 4
logger (30.12.2018 00:02:04): bandwidth narrow
logger (30.12.2018 00:02:04): chip authentication ok: 14
logger (30.12.2018 00:02:04): frequency band 868MHz (EU)
system (30.12.2018 00:02:05): stop of logging process initiated.
logger (30.12.2018 00:02:05): parent process received termination signal (15).
logger (30.12.2018 00:02:05): child process received termination signal (15).
database (30.12.2018 00:02:05): process terminated normally.
test5m (30.12.2018 00:02:05): USB storage remounted: /dev/sda
database (30.12.2018 00:02:06): process started.
system (30.12.2018 00:02:06): start of logging process initiated.
logger (30.12.2018 00:02:06): databases connected. Update interval 3600 seconds.
logger (30.12.2018 00:02:06): data logger (version 5.1a, build 12614) started.
logger (30.12.2018 00:02:06): error while doing bind (port 5551): Address already in use
logger (30.12.2018 00:02:06): killed process "2761/sh" listening to port 5551.
database (30.12.2018 00:02:06): database sync done (0 tables, 0/0 writes).
logger (30.12.2018 00:02:37): databases connected. Update interval 3600 seconds.
logger (30.12.2018 00:02:37): data logger (version 5.1a, build 12614) started.
logger (30.12.2018 00:02:37): error while doing bind (port 5551): Address already in use
logger (30.12.2018 00:02:37): killed process "2763/meteosys" listening to port 5551.
logger (30.12.2018 00:03:07): databases connected. Update interval 3600 seconds.
logger (30.12.2018 00:03:07): data logger (version 5.1a, build 12614) started.
logger (30.12.2018 00:03:07): connect station 0 (Meteostick Vantage via USB serial).
logger (30.12.2018 00:03:07): connect station 9 (System Data via Plug-in).
logger (30.12.2018 00:03:08): transmitter 1 registered as ISS
logger (30.12.2018 00:03:08): transmitter 2 registered as Wind
logger (30.12.2018 00:03:08): transmitter 3 registered as Temperature
logger (30.12.2018 00:03:08): transmitter 4 registered as Temperature
logger (30.12.2018 00:03:08): Meteostick Version 2.5.1
logger (30.12.2018 00:03:08): debug off
logger (30.12.2018 00:03:08): verbose off
logger (30.12.2018 00:03:08): output raw (8 bytes)
logger (30.12.2018 00:03:08): output raw (10 bytes)
logger (30.12.2018 00:03:08): filter on
logger (30.12.2018 00:03:08): rx threshold set to -90db
logger (30.12.2018 00:03:08): listening to transmitter 1 2 3 4
logger (30.12.2018 00:03:08): bandwidth narrow
logger (30.12.2018 00:03:08): chip authentication ok: 14
logger (30.12.2018 00:03:08): frequency band 868MHz (EU)
logger (30.12.2018 00:03:10): waiting for sensors (wind0, rain0, th0, thb0) to provide data.
logger (30.12.2018 00:03:10): services paused.
logger (30.12.2018 00:05:09): give up waiting for sensors after 120 secs.
logger (30.12.2018 00:05:09): services activated.

At the last manual back-up the log MB gave ’media size is 28,8G (28,7G free)’. USB-info: capacity 30,95 GB; Available 30,78 GB free.
Schermafbeelding 2018-12-30 om 09.44.23.jpg
Schermafbeelding 2018-12-30 om 09.44.23.jpg (11.58 KiB) Viewed 185 times
Schermafbeelding 2018-12-30 om 09.48.51.jpg
Schermafbeelding 2018-12-30 om 09.48.51.jpg (20.22 KiB) Viewed 185 times
The backup of last night on usb is 504 KB; the backups before are approx 25 Mb.

The problem occurs after the MB has been repaired in November after the MB Pro crashed at a reboot

Regards.

BeBe
Junior Boarder
Junior Boarder
Posts: 21
Joined: Fri Feb 12, 2016 6:36 pm
Location: Grou
Contact:

Re: MB restarts when a backup is made

Post by BeBe » Mon Jan 14, 2019 10:28 am

My MB pro reboots every time it receives a backup command. I activated the backup script on the tab system; every time the MB pro does a reboot and not a backup.
Schermafbeelding 2019-01-14 om 09.13.14.jpg
Schermafbeelding 2019-01-14 om 09.13.14.jpg (29.58 KiB) Viewed 115 times
database (14.01.2019 00:02:20): process started.
database (14.01.2019 00:02:20): Content of RAM database restored.
database (14.01.2019 00:02:20): database sync done (0 tables, 0/0 writes).
wnetd (14.01.2019 00:02:23): process started.
system (14.01.2019 00:02:23): start of logging process initiated.
logger (14.01.2019 00:02:23): databases connected. Update interval 3600 seconds.
logger (14.01.2019 00:02:23): data logger (version 5.1a, build 12693) started.
logger (14.01.2019 00:02:25): connect station 0 (Meteostick Vantage via USB serial).
logger (14.01.2019 00:02:25): connect station 9 (System Data via Plug-in).
logger (14.01.2019 00:02:28): waiting for sensors (wind0, rain0, th0, thb0) to provide data.
logger (14.01.2019 00:02:28): services paused.
logger (14.01.2019 00:02:29): transmitter 1 registered as ISS
logger (14.01.2019 00:02:29): transmitter 2 registered as Wind
logger (14.01.2019 00:02:29): transmitter 3 registered as Temperature
logger (14.01.2019 00:02:29): transmitter 4 registered as Temperature
logger (14.01.2019 00:02:29): Meteostick Version 2.5.1
logger (14.01.2019 00:02:29): debug off
logger (14.01.2019 00:02:29): verbose off
logger (14.01.2019 00:02:29): output raw (8 bytes)
logger (14.01.2019 00:02:29): output raw (10 bytes)
logger (14.01.2019 00:02:29): filter on
logger (14.01.2019 00:02:29): rx threshold set to -90db
logger (14.01.2019 00:02:29): listening to transmitter 1 2 3 4
logger (14.01.2019 00:02:29): bandwidth narrow
logger (14.01.2019 00:02:29): chip authentication ok: 14
logger (14.01.2019 00:02:29): frequency band 868MHz (EU)
system (14.01.2019 00:02:31): stop of logging process initiated.
logger (14.01.2019 00:02:31): parent process received termination signal (15).
logger (14.01.2019 00:02:31): child process received termination signal (15).
database (14.01.2019 00:02:31): process terminated normally.
test5m (14.01.2019 00:02:31): USB storage remounted: /dev/sda
database (14.01.2019 00:02:31): process started.
system (14.01.2019 00:02:31): start of logging process initiated.
logger (14.01.2019 00:02:32): databases connected. Update interval 3600 seconds.
logger (14.01.2019 00:02:32): data logger (version 5.1a, build 12693) started.
logger (14.01.2019 00:02:32): error while doing bind (port 5551): Address already in use
logger (14.01.2019 00:02:32): killed process "2757/sh" listening to port 5551.
database (14.01.2019 00:02:32): database sync done (0 tables, 0/0 writes).
logger (14.01.2019 00:03:02): databases connected. Update interval 3600 seconds.
logger (14.01.2019 00:03:02): data logger (version 5.1a, build 12693) started.
logger (14.01.2019 00:03:02): error while doing bind (port 5551): Address already in use
logger (14.01.2019 00:03:02): killed process "2758/meteosys" listening to port 5551.
logger (14.01.2019 00:03:32): databases connected. Update interval 3600 seconds.
logger (14.01.2019 00:03:32): data logger (version 5.1a, build 12693) started.
logger (14.01.2019 00:03:33): connect station 0 (Meteostick Vantage via USB serial).
logger (14.01.2019 00:03:33): connect station 9 (System Data via Plug-in).
logger (14.01.2019 00:03:33): transmitter 1 registered as ISS
logger (14.01.2019 00:03:33): transmitter 2 registered as Wind
logger (14.01.2019 00:03:33): transmitter 3 registered as Temperature
logger (14.01.2019 00:03:33): transmitter 4 registered as Temperature
logger (14.01.2019 00:03:33): Meteostick Version 2.5.1
logger (14.01.2019 00:03:33): debug off
logger (14.01.2019 00:03:33): verbose off
logger (14.01.2019 00:03:33): output raw (8 bytes)
logger (14.01.2019 00:03:33): output raw (10 bytes)
logger (14.01.2019 00:03:33): filter on
logger (14.01.2019 00:03:33): rx threshold set to -90db
logger (14.01.2019 00:03:33): listening to transmitter 1 2 3 4
logger (14.01.2019 00:03:33): bandwidth narrow
logger (14.01.2019 00:03:33): chip authentication ok: 14
logger (14.01.2019 00:03:33): frequency band 868MHz (EU)
logger (14.01.2019 00:03:36): waiting for sensors (wind0, rain0, th0, thb0) to provide data.
logger (14.01.2019 00:03:36): services paused.
logger (14.01.2019 00:04:34): sensors are now providing data.
logger (14.01.2019 00:04:34): services started.

Even with a manual backup, the MB does a reboot and not a backup.
How is this possible? :evil:
Schermafbeelding 2019-01-14 om 09.02.03.jpg
Schermafbeelding 2019-01-14 om 09.02.03.jpg (30.89 KiB) Viewed 115 times
Schermafbeelding 2019-01-14 om 09.02.23.jpg
Schermafbeelding 2019-01-14 om 09.02.23.jpg (17.72 KiB) Viewed 115 times
oled (14.01.2019 07:59:24): process started.
database (14.01.2019 09:01:04): process started.
database (14.01.2019 09:01:04): Content of RAM database restored.
database (14.01.2019 09:01:04): database sync done (0 tables, 0/0 writes).
wnetd (14.01.2019 09:01:07): process started.
system (14.01.2019 09:01:07): start of logging process initiated.
logger (14.01.2019 09:01:07): databases connected. Update interval 3600 seconds.
logger (14.01.2019 09:01:07): data logger (version 5.1a, build 12693) started.
logger (14.01.2019 09:01:09): connect station 0 (Meteostick Vantage via USB serial).
logger (14.01.2019 09:01:09): connect station 9 (System Data via Plug-in).
logger (14.01.2019 09:01:12): waiting for sensors (wind0, rain0, th0, thb0) to provide data.
logger (14.01.2019 09:01:12): services paused.
logger (14.01.2019 09:01:12): transmitter 1 registered as ISS
logger (14.01.2019 09:01:12): transmitter 2 registered as Wind
logger (14.01.2019 09:01:12): transmitter 3 registered as Temperature
logger (14.01.2019 09:01:12): transmitter 4 registered as Temperature
logger (14.01.2019 09:01:12): Meteostick Version 2.5.1
logger (14.01.2019 09:01:12): debug off
logger (14.01.2019 09:01:12): verbose off
logger (14.01.2019 09:01:12): output raw (8 bytes)
logger (14.01.2019 09:01:12): output raw (10 bytes)
logger (14.01.2019 09:01:12): filter on
logger (14.01.2019 09:01:12): rx threshold set to -90db
logger (14.01.2019 09:01:12): listening to transmitter 1 2 3 4
logger (14.01.2019 09:01:12): bandwidth narrow
logger (14.01.2019 09:01:13): chip authentication ok: 14
logger (14.01.2019 09:01:13): frequency band 868MHz (EU)
system (14.01.2019 09:01:15): stop of logging process initiated.
logger (14.01.2019 09:01:15): parent process received termination signal (15).
logger (14.01.2019 09:01:15): child process received termination signal (15).
database (14.01.2019 09:01:15): process terminated normally.
test5m (14.01.2019 09:01:15): USB storage remounted: /dev/sda
database (14.01.2019 09:01:15): process started.
system (14.01.2019 09:01:15): start of logging process initiated.
database (14.01.2019 09:01:16): database sync done (0 tables, 0/0 writes).
logger (14.01.2019 09:01:16): databases connected. Update interval 3600 seconds.
logger (14.01.2019 09:01:16): data logger (version 5.1a, build 12693) started.
logger (14.01.2019 09:01:16): error while doing bind (port 5551): Address already in use
logger (14.01.2019 09:01:16): killed process "2753/sh" listening to port 5551.
logger (14.01.2019 09:01:46): databases connected. Update interval 3600 seconds.
logger (14.01.2019 09:01:46): data logger (version 5.1a, build 12693) started.
logger (14.01.2019 09:01:46): error while doing bind (port 5551): Address already in use
logger (14.01.2019 09:01:46): killed process "2756/meteosys" listening to port 5551.
logger (14.01.2019 09:02:16): databases connected. Update interval 3600 seconds.
logger (14.01.2019 09:02:16): data logger (version 5.1a, build 12693) started.
logger (14.01.2019 09:02:16): connect station 0 (Meteostick Vantage via USB serial).
logger (14.01.2019 09:02:16): connect station 9 (System Data via Plug-in).
logger (14.01.2019 09:02:17): transmitter 1 registered as ISS
logger (14.01.2019 09:02:17): transmitter 2 registered as Wind
logger (14.01.2019 09:02:17): transmitter 3 registered as Temperature
logger (14.01.2019 09:02:17): transmitter 4 registered as Temperature
logger (14.01.2019 09:02:17): Meteostick Version 2.5.1
logger (14.01.2019 09:02:17): debug off
logger (14.01.2019 09:02:17): verbose off
logger (14.01.2019 09:02:17): output raw (8 bytes)
logger (14.01.2019 09:02:17): output raw (10 bytes)
logger (14.01.2019 09:02:17): filter on
logger (14.01.2019 09:02:17): rx threshold set to -90db
logger (14.01.2019 09:02:17): listening to transmitter 1 2 3 4
logger (14.01.2019 09:02:17): bandwidth narrow
logger (14.01.2019 09:02:17): chip authentication ok: 14
logger (14.01.2019 09:02:17): frequency band 868MHz (EU)
logger (14.01.2019 09:02:18): waiting for sensors (wind0, rain0, th0, thb0) to provide data.
logger (14.01.2019 09:02:18): services paused.
logger (14.01.2019 09:03:18): sensors are now providing data.
logger (14.01.2019 09:03:18): services started.

User avatar
admin
Platinum Boarder
Platinum Boarder
Posts: 5601
Joined: Mon Oct 01, 2007 10:51 pm

Re: MB restarts when a backup is made

Post by admin » Thu Jan 17, 2019 1:21 am

There is no restart, data logging is halted during backup which is needed to avoid data inconsistencies.

Post Reply