How to get MBP to see UV and Solar sensors on a Davis Anemometer Transmitter Kit

This section covers the Meteobridge PRO units exclusively

Moderator: Mattk

Post Reply
seaman55
Fresh Boarder
Fresh Boarder
Posts: 3
Joined: Sat Mar 16, 2019 7:48 pm

How to get MBP to see UV and Solar sensors on a Davis Anemometer Transmitter Kit

Post by seaman55 » Sat Mar 16, 2019 8:34 pm

I have a Davis VP2 ISS in my back yard, using ID#3 for now, and a Davis Anemometer Transmitter Kit on the roof with and Anemometer, UV and Solar sensor attached using ID#1.
How do I tell the MB Pro to us ID#1 for Wind and Solar/UV sensors?

Right now I am accomplishing this by using this relay device solution;
https://cumulus.hosiene.co.uk/viewtopic ... b&start=15

But I figure the Meteobridge PRO should be able to do it internally, and I can then remove my relay.

User avatar
admin
Platinum Boarder
Platinum Boarder
Posts: 5829
Joined: Mon Oct 01, 2007 10:51 pm

Re: How to get MBP to see UV and Solar sensors on a Davis Anemometer Transmitter Kit

Post by admin » Sat Mar 16, 2019 8:42 pm

Define both as ISS and pick on Live data page which of the sensors should be used as primary.

seaman55
Fresh Boarder
Fresh Boarder
Posts: 3
Joined: Sat Mar 16, 2019 7:48 pm

Re: How to get MBP to see UV and Solar sensors on a Davis Anemometer Transmitter Kit

Post by seaman55 » Sat Mar 16, 2019 9:35 pm

Wow, never noticed that option before.
Thank you.
Giving that a try now.

Post Reply