meteohub.de

Update to Meteohub V5.0c (NSLU2, x86, SheevaPlug, RPI) brings these features:

• updates bash on x86, Shevaplug and ARM-alikes, RPI to make it "shell shock" proof.
• adds support for Ambient Weather Observer WS-1000 aka FineOffset HP-100x which don't have USB or serial computer connection. Data from outdoor sensor unit (WH24) of this station can now be read out via Meteostick (needs most recent Meteostick firmware 2.1b1 or newer). Indoor sensors (WH25) are not evaluated, pressure is provided by Meteostick hardware. US and EU models are supported. Outdoor sensor unit is solar powered and provides: Wind, Rain, Temp, Humidity, Solar Radiation, UV Index

  

  ws1000.png (38.18 KiB) Viewed 8505 times

  

  Screen Shot 2014-11-09 at 17.31.41.png (39.62 KiB) Viewed 8505 times

Update Link: http://www.meteohub.de/files/update-v5.0c.upd

Update Link (NSLU2 only): http://www.meteohub.de/files/update-nslu2-v5.0c.upd

I been having issues with this release...
After several days of ftp uploads it suddenly stops uploading data to my site.

I will be more than glad to debug for you if you would like.

Is there a way to force the ftp upload schedule..

Thanks.

it is controlled via crontab. Are you sure it is not some kind of a problem on the FTP server side?
With RPI there is a problem on stacking up processes as the RPI is to slow to handle some
computations in expected time. May be you are also impected by that. Are you using a RPI?