AcuRite Bridge will no longer connect Meteobridge **solved**
Posted: Mon Jul 27, 2015 12:31 am
Today I decided to move my AcuRite bridge to increase the signal strength to my 5 in 1. All was working perfectly fine before and now, for the life of me, I CANNOT get the AcuRite bridge recognized by Meteobridge. It is driving me crazy!
I'm using a TP-LINK TL-MR3020 and the ram hasn't maxed out yet..been around 80-84%. I've been using it for a month or two now at least constantly updating to wunderground without problems..until I moved it today. Nothing has changed..just longer ethernet cable and different outlet for the AcuRite bridge.
I know there was a bad code sent out, I already tried the USB thing with the rescue file and it didn't help at all. Still a red X next to the bridge. No matter what I do, red X. Also did it via SSH and still no luck. Nothing has changed..red X. For the life of me, I cannot get the Acurite Aculink Bridge working with Meteobridge anymore. I tried reverting back to older firmware version, still same symptoms.
I can access AcuLink bridge's web GUI that is connected via the LAN port on the Meteobridge. So I know its working..but Meteobridge is just not reading it.
Meteobridge 2.5 (Jul 26 2015, build 6777), FW 1.4 - is this good or bad?
These are the logs:
I don't know what to do!!! I tried everything..restarted a 100 times..it just doesn't work. Is this a lost cause? Someone please help! I've already been dropped from wunderground...
Someone please help!!
I'm using a TP-LINK TL-MR3020 and the ram hasn't maxed out yet..been around 80-84%. I've been using it for a month or two now at least constantly updating to wunderground without problems..until I moved it today. Nothing has changed..just longer ethernet cable and different outlet for the AcuRite bridge.
I know there was a bad code sent out, I already tried the USB thing with the rescue file and it didn't help at all. Still a red X next to the bridge. No matter what I do, red X. Also did it via SSH and still no luck. Nothing has changed..red X. For the life of me, I cannot get the Acurite Aculink Bridge working with Meteobridge anymore. I tried reverting back to older firmware version, still same symptoms.
I can access AcuLink bridge's web GUI that is connected via the LAN port on the Meteobridge. So I know its working..but Meteobridge is just not reading it.
Meteobridge 2.5 (Jul 26 2015, build 6777), FW 1.4 - is this good or bad?
These are the logs:
Code: Select all
logger (26.07.2015 18:27:04): disconnect station 0 (AcuLink): response without data
logger (26.07.2015 18:27:06): usb port reset.
logger (26.07.2015 18:27:34): connect station 0 (AcuLink via USB HID).
logger (26.07.2015 18:27:34): unexpected 0 bytes.
logger (26.07.2015 18:27:34): disconnect station 0 (AcuLink): response without data
logger (26.07.2015 18:27:36): usb port reset.
logger (26.07.2015 18:28:04): connect station 0 (AcuLink via USB HID).
logger (26.07.2015 18:28:04): unexpected 0 bytes.
logger (26.07.2015 18:28:04): disconnect station 0 (AcuLink): response without data
logger (26.07.2015 18:28:06): usb port reset.
logger (26.07.2015 18:28:34): connect station 0 (AcuLink via USB HID).
logger (26.07.2015 18:28:34): unexpected 0 bytes.
logger (26.07.2015 18:28:34): disconnect station 0 (AcuLink): response without data
logger (26.07.2015 18:28:36): usb port reset.Someone please help!!