Page 1 of 1

No internet access on new RPI2 setup

Posted: Wed Jan 06, 2016 12:54 pm
by plex
Hello

I'm trying out Meteohub, as a green replacement for my Weahter Display setup.

Installation was straight forward, but system info tells me WAN IP no internet access? FTP upload is working, but email doesn't.

I can't figure out, what the problem is, since I'm using dhcp with my router, and have static assigned 192.168.1.150. There's no limitations in the routers firewall.

Also Meteohub tells me, that there's no update, even the newest version is 5.0k - at the moment I'm running 5.0f. I guess its related to the "no internet" problem.

I have a static public ip adress from my ISP, and I've setup a port forward as described in the manuel from port 7777 outside to port 80 inside. It works pretty well from outside, so how come the Mteohub tells me "no internet"??

Another really really strange problem - I can't browse to http://www.meteohub.de ? No computers on my lan can access this page, but it worked days ago? My mobile WWAN on my laptop has no problems accessing meteohub.de. I really can't figure this out, since I haven't changed any settings in my Asus router?

Any help are very welcome :)

Image

Image

Re: No internet access on new RPI2 setup

Posted: Wed Jan 06, 2016 8:15 pm
by plex
To answer my own question...

I've spendt many hours to figure out this mistory - router reset, new firmware on router, settings etc. Then I tried to disconnect my own router, and one computer directly to my ISP cable modem... Still no access to www.meteohub.de, forum.meteohub.de.

So problem is ISP related... Gave them a call, and they are going to investigate it tomorrow.

Very stange problem... :?:

Re: No internet access on new RPI2 setup

Posted: Fri Jan 08, 2016 9:36 pm
by Manhart
I have the same issue with 5.0m on my PI2:

* no access to internet
* finds no updates
* smb mount "public" is not visible in the network

Regards

Matthias

Re: No internet access on new RPI2 setup

Posted: Sat Jan 09, 2016 11:51 am
by plex
Manhart wrote:I have the same issue with 5.0m on my PI2:

* no access to internet
* finds no updates
* smb mount "public" is not visible in the network

Regards

Matthias
Hello Mathias

My problem was fixed by my ISP - now I have "internet access" and I can access www.meteohub.de in my browser.

Sounds like you problem is related to local area network, since you can't access smb neither. Router problem, ip conflict ?

I hope you'll locate the problem

Re: No internet access on new RPI2 setup

Posted: Sun Jan 10, 2016 3:26 pm
by Manhart
One again my Mini-SD-Card in my PI was the problem. I found several error messages in the log of meteohub and i had to rewrite the SD-Card with an older copy of an image i took. I moved my weather data to an external USB-stick before and i had no lost of data.

Regards

Matthias