Page 1 of 1
Raspberry Pi 3
Posted: Mon Mar 28, 2016 8:54 pm
by schlosser
Guten Tag
Hat schon maljemand die Software auf einem raspberry pi 3 zum laufen bekommen?
liebe Grüsse Stefan
Re: Raspberry Pi 3
Posted: Wed Apr 06, 2016 11:11 am
by blacklistedcard
Is there any image for the Raspberry PI 3?
Re: Raspberry Pi 3
Posted: Sun Apr 10, 2016 12:48 am
by blacklistedcard
Looking forward to an PI 3 image. It would have the wifi built-in
Re: Raspberry Pi 3
Posted: Sun Apr 24, 2016 1:06 am
by admin
I have one here, but currently no time to do a port. Will take some more time, sorry...
Re: Raspberry Pi 3
Posted: Sun Jul 24, 2016 11:22 pm
by Spi
Looking forward to an PI 3 image, too.
May it is possible to support you, or exists a workarround?
Greetings, Spi
Re: Raspberry Pi 3
Posted: Mon Aug 15, 2016 11:37 pm
by Manhart
Any news about the image for Raspberry 3 ?
Re: Raspberry Pi 3
Posted: Sun Oct 02, 2016 10:49 am
by Manhart
I moved my current Meteohub 5.0q from my Raspberry Pi 2 to my new Raspberry Pi 3 with the following steps:
- 1) Download the latest image 5.0p from the website
2) Install image on a new SD card
3) Put SD card in a Raspberry Pi 1 or 2
4) Connect only network and power to the Raspberry Pi
5) Wait for the installation of Meteohub
6) Connect with ssh to the Rapsberry Pi
7) Run: apt-get update
8] Run: apt-get upgrade
9) Run: rpi-update
10) Reboot the Raspberry
11) Check, if the system runs fine
12) Switch off the system
13) Move the SD card to the new Raspberry Pi 3
14) Start the new Raspberry Pi 3 with the new SD card from the old Raspberry Pi
15) The system starts fine on the new Raspberry Pi 3
16) Transfer all data and parameters from the old Meteohub to the new one including the transfer of the license
I used this procedure to avoid problems with my running system. I hope this helps others to move the system to the Raspberry Pi 3.
Regards
Matthias