meteohub.de

I've got two issues. First, either once a day or once every other day, my Meteobridge Pro stops reporting to wunderground and the only way I've been able to fix it is by either rebooting or unplugging/plugging in the unit.

In troubleshooting that issue, I played around with the data that appears on the display screen and noticed that there's some kind of screen burn / artifacting that's going on. I tried to attach a photo but I get an error message from phpBB saying "Sorry, the board attachment quota has been reached." Here's a link on imgur:

http://imgur.com/a/xcOYi

I'm seeing the following in the log:

database (11.04.2017 10:37:03): rollback on insert forced (1) (min RAM): thb0temp
database (11.04.2017 10:37:22): cannot create table (after 100 tries in 17887ms): database is locked
database (11.04.2017 10:37:22): cannot prepare insert into thb0temp_min RAM (after 0 tries in 51ms): no such table: thb0temp_min (1)
database (11.04.2017 10:37:22): rollback on insert forced (1) (min RAM): thb0temp
database (11.04.2017 10:37:40): cannot create table (after 100 tries in 17726ms): database is locked
database (11.04.2017 10:37:40): cannot prepare insert into thb0temp_min RAM (after 0 tries in 109ms): no such table: thb0temp_min (1)
database (11.04.2017 10:37:40): rollback on insert forced (1) (min RAM): thb0temp
database (11.04.2017 10:37:57): cannot create table (after 100 tries in 17524ms): database is locked
database (11.04.2017 10:37:58): cannot prepare insert into thb0temp_min RAM (after 0 tries in 72ms): no such table: thb0temp_min (1)
database (11.04.2017 10:37:58): rollback on insert forced (1) (min RAM): thb0temp
database (11.04.2017 10:38:16): cannot create table (after 100 tries in 18343ms): database is locked
database (11.04.2017 10:38:16): cannot prepare insert into thb0temp_min RAM (after 0 tries in 52ms): no such table: thb0temp_min (1)
database (11.04.2017 10:38:16): rollback on insert forced (1) (min RAM): thb0temp
database (11.04.2017 10:38:35): cannot create table (after 100 tries in 18282ms): database is locked
database (11.04.2017 10:38:35): cannot prepare insert into thb0temp_min RAM (after 0 tries in 51ms): no such table: thb0temp_min (1)
database (11.04.2017 10:38:35): rollback on insert forced (1) (min RAM): thb0temp
database (11.04.2017 10:38:53): cannot create table (after 100 tries in 17926ms): database is locked
database (11.04.2017 10:38:53): cannot prepare insert into thb0temp_min RAM (after 0 tries in 51ms): no such table: thb0temp_min (1)
database (11.04.2017 10:38:53): rollback on insert forced (1) (min RAM): thb0temp
database (11.04.2017 10:39:11): cannot create table (after 100 tries in 18120ms): database is locked
database (11.04.2017 10:39:12): cannot prepare insert into thb0temp_min RAM (after 0 tries in 51ms): no such table: thb0temp_min (1)
database (11.04.2017 10:39:12): rollback on insert forced (1) (min RAM): thb0temp
database (11.04.2017 10:39:30): cannot create table (after 100 tries in 17940ms): database is locked
database (11.04.2017 10:39:30): cannot prepare insert into thb0temp_min RAM (after 0 tries in 53ms): no such table: thb0temp_min (1)
database (11.04.2017 10:39:30): rollback on insert forced (1) (min RAM): thb0temp
database (11.04.2017 10:39:48): cannot create table (after 100 tries in 17732ms): database is locked
database (11.04.2017 10:39:48): cannot prepare insert into thb0temp_min RAM (after 0 tries in 51ms): no such table: thb0temp_min (1)
database (11.04.2017 10:39:48): rollback on insert forced (1) (min RAM): thb0temp
database (11.04.2017 10:40:06): cannot create table (after 100 tries in 18460ms): database is locked
database (11.04.2017 10:40:07): cannot prepare insert into thb0temp_min RAM (after 0 tries in 51ms): no such table: thb0temp_min (1)
database (11.04.2017 10:40:07): rollback on insert forced (1) (min RAM): thb0temp
database (11.04.2017 10:40:24): cannot create table (after 100 tries in 17534ms): database is locked
database (11.04.2017 10:40:25): cannot prepare insert into thb0temp_min RAM (after 0 tries in 50ms): no such table: thb0temp_min (1)
database (11.04.2017 10:40:25): rollback on insert forced (1) (min RAM): thb0temp
database (11.04.2017 10:40:43): cannot create table (after 100 tries in 18454ms): database is locked
database (11.04.2017 10:40:44): cannot prepare insert into thb0temp_min RAM (after 0 tries in 51ms): no such table: thb0temp_min (1)
database (11.04.2017 10:40:44): rollback on insert forced (1) (min RAM): thb0temp
database (11.04.2017 10:41:02): cannot create table (after 100 tries in 17787ms): database is locked
database (11.04.2017 10:41:02): cannot prepare insert into thb0temp_min RAM (after 0 tries in 53ms): no such table: thb0temp_min (1)
database (11.04.2017 10:41:02): rollback on insert forced (1) (min RAM): thb0temp
database (11.04.2017 10:41:20): cannot create table (after 100 tries in 17994ms): database is locked
database (11.04.2017 10:41:20): cannot prepare insert into thb0temp_min RAM (after 0 tries in 165ms): no such table: thb0temp_min (1)
database (11.04.2017 10:41:20): rollback on insert forced (1) (min RAM): thb0temp
database (11.04.2017 10:41:39): cannot create table (after 100 tries in 18032ms): database is locked
database (11.04.2017 10:41:39): cannot prepare insert into thb0temp_min RAM (after 0 tries in 51ms): no such table: thb0temp_min (1)
database (11.04.2017 10:41:39): rollback on insert forced (1) (min RAM): thb0temp
database (11.04.2017 10:41:58): cannot create table (after 100 tries in 18222ms): database is locked
database (11.04.2017 10:41:58): cannot prepare insert into thb0temp_min RAM (after 0 tries in 119ms): no such table: thb0temp_min (1)
database (11.04.2017 10:41:58): rollback on insert forced (1) (min RAM): thb0temp
database (11.04.2017 10:42:17): cannot create table (after 100 tries in 18535ms): database is locked
database (11.04.2017 10:42:17): cannot prepare insert into thb0temp_min

I'm really not sure what's up, just seems like the poor thing isn't healthy. Here's the top-line info off the system page:

Platform: Meteobridge PRO
RAM: 61500 kB total, 13092 kB free (78% used)
Storage Intenso: Internal 7028 MB total, 6997 MB free (0% used)
SW Version: Meteobridge 3.2 (Apr 11 2017, build 11072), FW 1.4
Uptime: 13 hours, 7 minutes Buffer: 1 items (0%)
Power Data: 5.46V 329mA 1.80W (Box Climate: 46.6°C 12%)

If you'd like I can open things up so that you can take a look. Please advise.

- Art

Can you please send output when browsing to "http://ip-of-your-mbpro/cgi-bin/system.cgi?dmesg"?
Where did you buy the unit?

I purchased the unit from Ambient Weather via Amazon on September 30, 2016.

Here's the output you requested:

command: dmesg
-------------
[ 0.000000] Linux version 3.10.49 (boris@mars) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r44550) ) #685 Thu Dec 17 00:17:35 CET 2015
[ 0.000000] MyLoader: sysp=2ab3abab, boardp=baababa3, parts=f2ba2aaa
[ 0.000000] bootconsole [early0] enabled
[ 0.000000] CPU revision is: 00019374 (MIPS 24Kc)
[ 0.000000] SoC: Atheros AR9330 rev 1
[ 0.000000] Clocks: CPU:400.000MHz, DDR:400.000MHz, AHB:200.000MHz, Ref:40.000MHz
[ 0.000000] Determined physical RAM map:
[ 0.000000] memory: 04000000 @ 00000000 (usable)
[ 0.000000] Initrd not found or empty - disabling initrd
[ 0.000000] Zone ranges:
[ 0.000000] Normal [mem 0x00000000-0x03ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
[ 0.000000] On node 0 totalpages: 16384
[ 0.000000] free_area_init_node: node 0, pgdat 803109b0, node_mem_map 81000000
[ 0.000000] Normal zone: 128 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 16384 pages, LIFO batch:3
[ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
[ 0.000000] Kernel command line: board=CARAMBOLA2 console=ttyATH0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro rootfstype=squashfs,jffs2 noinitrd
[ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
[ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Writing ErrCtl register=00000000
[ 0.000000] Readback ErrCtl register=00000000
[ 0.000000] Memory: 61272k/65536k available (2239k kernel code, 4264k reserved, 603k data, 228k init, 0k highmem)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] NR_IRQS:51
[ 0.080000] Calibrating delay loop... 265.42 BogoMIPS (lpj=1327104)
[ 0.080000] pid_max: default: 32768 minimum: 301
[ 0.080000] Mount-cache hash table entries: 512
[ 0.090000] NET: Registered protocol family 16
[ 0.100000] MIPS: machine is 8devices Carambola2 board
[ 0.550000] bio: create slab <bio-0> at 0
[ 0.560000] Switching to clocksource MIPS
[ 0.570000] NET: Registered protocol family 2
[ 0.570000] TCP established hash table entries: 512 (order: 0, 4096 bytes)
[ 0.570000] TCP bind hash table entries: 512 (order: -1, 2048 bytes)
[ 0.580000] TCP: Hash tables configured (established 512 bind 512)
[ 0.580000] TCP: reno registered
[ 0.580000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.590000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.600000] NET: Registered protocol family 1
[ 0.600000] PCI: CLS 0 bytes, default 32
[ 0.620000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.630000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.640000] msgmni has been set to 119
[ 0.640000] io scheduler noop registered
[ 0.640000] io scheduler deadline registered (default)
[ 0.650000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[ 0.660000] ar933x-uart: ttyATH0 at MMIO 0x18020000 (irq = 11) is a AR933X UART
[ 0.660000] console [ttyATH0] enabled, bootconsole disabled
[ 0.680000] ath79-spi ath79-spi: master is unqueued, this is deprecated
[ 0.680000] m25p80 spi0.0: found w25q128, expected m25p80
[ 0.690000] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.690000] 4 cmdlinepart partitions found on MTD device spi0.0
[ 0.700000] Creating 4 MTD partitions on "spi0.0":
[ 0.700000] 0x000000000000-0x000000040000 : "u-boot"
[ 0.710000] 0x000000040000-0x000000050000 : "u-boot-env"
[ 0.720000] 0x000000050000-0x000000ff0000 : "firmware"
[ 0.740000] 2 uimage-fw partitions found on MTD device firmware
[ 0.740000] 0x000000050000-0x000000160000 : "kernel"
[ 0.750000] 0x000000160000-0x000000ff0000 : "rootfs"
[ 0.750000] mtd: device 4 (rootfs) set to be root filesystem
[ 0.760000] 1 squashfs-split partitions found on MTD device rootfs
[ 0.760000] 0x0000006d0000-0x000000ff0000 : "rootfs_data"
[ 0.770000] 0x000000ff0000-0x000001000000 : "art"
[ 0.790000] libphy: ag71xx_mdio: probed
[ 1.340000] ag71xx-mdio.1: Found an AR7240/AR9330 built-in switch
[ 2.380000] eth0: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
[ 2.930000] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.1:04 [uid=004dd041, driver=Generic PHY]
[ 2.940000] eth1: Atheros AG71xx at 0xb9000000, irq 4, mode:MII
[ 2.950000] TCP: cubic registered
[ 2.950000] NET: Registered protocol family 17
[ 2.960000] 8021q: 802.1Q VLAN Support v1.8
[ 2.970000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[ 2.970000] Freeing unused kernel memory: 228K (80327000 - 80360000)
[ 6.800000] usbcore: registered new interface driver usbfs
[ 6.800000] usbcore: registered new interface driver hub
[ 6.810000] usbcore: registered new device driver usb
[ 6.860000] SCSI subsystem initialized
[ 6.870000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.880000] ehci-platform: EHCI generic platform driver
[ 6.880000] ehci-platform ehci-platform: EHCI Host Controller
[ 6.890000] ehci-platform ehci-platform: new USB bus registered, assigned bus number 1
[ 6.900000] ehci-platform ehci-platform: irq 3, io mem 0x1b000000
[ 6.920000] ehci-platform ehci-platform: USB 2.0 started, EHCI 1.00
[ 6.920000] hub 1-0:1.0: USB hub found
[ 6.920000] hub 1-0:1.0: 1 port detected
[ 6.930000] usbcore: registered new interface driver usb-storage
[ 7.450000] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 7.600000] hub 1-1:1.0: USB hub found
[ 7.600000] hub 1-1:1.0: 4 ports detected
[ 7.890000] usb 1-1.3: new full-speed USB device number 3 using ehci-platform
[ 8.090000] usb 1-1.4: new high-speed USB device number 4 using ehci-platform
[ 8.200000] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[ 8.210000] scsi0 : usb-storage 1-1.4:1.0
[ 9.510000] scsi 0:0:0:0: Direct-Access Intenso Premium Line 1100 PQ: 0 ANSI: 6
[ 9.520000] sd 0:0:0:0: [sda] 15720448 512-byte logical blocks: (8.04 GB/7.49 GiB)
[ 9.530000] sd 0:0:0:0: [sda] Write Protect is off
[ 9.530000] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 9.530000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.550000] sda: unknown partition table
[ 9.560000] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 12.510000] jffs2: notice: (342) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 110 of xref (0 dead, 95 orphan) found.
[ 12.530000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 12.530000] block: unable to load configuration (fstab: Entry not found)
[ 12.540000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[ 12.570000] block: extroot: not configured
[ 12.670000] jffs2: notice: (339) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (1 unchecked, 0 orphan) and 110 of xref (0 dead, 95 orphan) found.
[ 13.020000] block: attempting to load /tmp/jffs_cfg/upper/etc/config/fstab
[ 13.020000] block: unable to load configuration (fstab: Entry not found)
[ 13.030000] block: attempting to load /tmp/jffs_cfg/etc/config/fstab
[ 13.040000] block: extroot: not configured
[ 18.310000] NET: Registered protocol family 10
[ 18.340000] nf_conntrack version 0.5.0 (960 buckets, 3840 max)
[ 18.360000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 18.390000] hidraw: raw HID events driver (C) Jiri Kosina
[ 18.400000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 18.410000] Loading modules backported from Linux version master-2014-05-22-0-gf2032ea
[ 18.410000] Backport generated by backports.git backports-20140320-37-g5c33da0
[ 18.430000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 18.460000] usbcore: registered new interface driver usbhid
[ 18.470000] usbhid: USB HID core driver
[ 18.480000] usbcore: registered new interface driver usbserial
[ 18.490000] usbcore: registered new interface driver usbserial_generic
[ 18.490000] usbserial: USB Serial support registered for generic
[ 18.520000] xt_time: kernel timezone is -0000
[ 18.530000] usbcore: registered new interface driver cdc_ether
[ 18.570000] cfg80211: Calling CRDA to update world regulatory domain
[ 18.570000] cfg80211: World regulatory domain updated:
[ 18.580000] cfg80211: DFS Master region: unset
[ 18.580000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 18.590000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.600000] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.610000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.610000] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.620000] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 18.630000] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 18.640000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 18.650000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 18.670000] usbcore: registered new interface driver ch341
[ 18.670000] usbserial: USB Serial support registered for ch341-uart
[ 18.690000] usbcore: registered new interface driver cp210x
[ 18.690000] usbserial: USB Serial support registered for cp210x
[ 18.710000] usbcore: registered new interface driver ftdi_sio
[ 18.710000] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 18.720000] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[ 18.750000] usb 1-1.3: Detected FT232RL
[ 18.750000] usb 1-1.3: Number of endpoints 2
[ 18.750000] usb 1-1.3: Endpoint 1 MaxPacketSize 16384
[ 18.760000] usb 1-1.3: Endpoint 2 MaxPacketSize 16384
[ 18.760000] usb 1-1.3: Setting MaxPacketSize 64
[ 18.790000] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB0
[ 18.860000] usbcore: registered new interface driver pl2303
[ 18.880000] usbserial: USB Serial support registered for pl2303
[ 18.880000] PPP generic driver version 2.4.2
[ 18.900000] NET: Registered protocol family 24
[ 18.950000] usbcore: registered new interface driver option
[ 18.970000] usbserial: USB Serial support registered for GSM modem (1-port)
[ 19.010000] ath: EEPROM regdomain: 0x0
[ 19.010000] ath: EEPROM indicates default country code should be used
[ 19.010000] ath: doing EEPROM country->regdmn map search
[ 19.010000] ath: country maps to regdmn code: 0x3a
[ 19.010000] ath: Country alpha2 being used: US
[ 19.010000] ath: Regpair used: 0x3a
[ 19.030000] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 19.030000] cfg80211: Calling CRDA for country: US
[ 19.040000] ieee80211 phy0: Atheros AR9330 Rev:1 mem=0xb8100000, irq=2
[ 19.050000] cfg80211: Regulatory domain changed to country: US
[ 19.050000] cfg80211: DFS Master region: FCC
[ 19.050000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 19.060000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A)
[ 19.070000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 1700 mBm), (N/A)
[ 19.080000] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2300 mBm), (0 s)
[ 19.090000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 19.100000] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 19.190000] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 19.210000] ftdi_sio 1-1.3:1.0: device disconnected
[ 19.210000] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[ 19.240000] usb 1-1.3: Detected FT232RL
[ 19.240000] usb 1-1.3: Number of endpoints 2
[ 19.240000] usb 1-1.3: Endpoint 1 MaxPacketSize 16384
[ 19.250000] usb 1-1.3: Endpoint 2 MaxPacketSize 16384
[ 19.250000] usb 1-1.3: Setting MaxPacketSize 64
[ 19.270000] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB0
[ 21.320000] i2c /dev entries driver
[ 21.330000] Custom GPIO-based I2C driver version 0.1.1
[ 21.350000] i2c-gpio i2c-gpio.0: using pins 20 (SDA) and 21 (SCL)
[ 34.320000] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 34.320000] device eth0 entered promiscuous mode
[ 34.330000] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 36.460000] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 39.970000] wlan0: authenticate with a6:04:60:1b:07:2c
[ 39.980000] wlan0: direct probe to a6:04:60:1b:07:2c (try 1/3)
[ 40.200000] wlan0: send auth to a6:04:60:1b:07:2c (try 2/3)
[ 40.220000] wlan0: authenticated
[ 40.230000] wlan0: associate with a6:04:60:1b:07:2c (try 1/3)
[ 40.240000] wlan0: RX AssocResp from a6:04:60:1b:07:2c (capab=0x1431 status=0 aid=2)
[ 40.250000] wlan0: associated
[ 40.250000] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 51.300000] EXT4-fs (sda): couldn't mount as ext3 due to feature incompatibilities
[ 51.310000] EXT4-fs (sda): couldn't mount as ext2 due to feature incompatibilities
[ 51.350000] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null)
[ 52.160000] EXT4-fs (sda): couldn't mount as ext3 due to feature incompatibilities
[ 52.170000] EXT4-fs (sda): couldn't mount as ext2 due to feature incompatibilities
[ 52.190000] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null)
[ 73.800000] EXT4-fs (sda): re-mounted. Opts: data=ordered,commit=60,max_batch_time=1000000,min_batch_time=1000000,errors=remount-ro
[30729.800000] wlan0: disassociated from a6:04:60:1b:07:2c (Reason: 1)
[30730.640000] wlan0: authenticate with a6:04:60:0d:58:61
[30730.650000] wlan0: send auth to a6:04:60:0d:58:61 (try 1/3)
[30730.730000] wlan0: authenticated
[30730.740000] wlan0: associate with a6:04:60:0d:58:61 (try 1/3)
[30730.760000] wlan0: RX AssocResp from a6:04:60:0d:58:61 (capab=0x1431 status=0 aid=2)
[30730.760000] wlan0: associated
-------------

Now it's telling me it's not powered correctly and I haven't moved the plug. Note how it's reporting that it's not getting any power but it's clearly on :

http://imgur.com/a/gltiL

Looking at the wunderground data, there's a gap in data tonight from 7:56pm to 8:41pm. Here's the latest from Messages:

oled (11.04.2017 04:48:23): process started.
database (11.04.2017 20:07:25): process started.
wnetd (11.04.2017 20:07:27): process started.
system (12.04.2017 03:07:27): start of logging process initiated.
logger (11.04.2017 20:07:27): databases connected. Update interval 3600 seconds.
logger (11.04.2017 20:07:27): historical data loaded (0 records).
logger (11.04.2017 20:07:27): data logger (version 5.0t, build 11072) started.
logger (11.04.2017 20:07:29): connect station 0 (Meteostick Vantage via USB serial).
logger (11.04.2017 20:07:29): connect station 9 (System Data via Plug-in).
database (11.04.2017 20:07:31): database sync done (17 tables, 85/85 writes)
logger (11.04.2017 20:07:32): transmitter 1 registered as ISS
logger (11.04.2017 20:07:32): Meteostick Version 2.4
logger (11.04.2017 20:07:32): debug off
logger (11.04.2017 20:07:32): verbose off
logger (11.04.2017 20:07:32): output raw (8 bytes)
logger (11.04.2017 20:07:32): output raw (10 bytes)
logger (11.04.2017 20:07:32): filter on
logger (11.04.2017 20:07:32): rx threshold set to -90db
logger (11.04.2017 20:07:32): listening to transmitter 1
logger (11.04.2017 20:07:32): bandwidth normal
logger (11.04.2017 20:07:33): waiting for sensors (wind0, rain0, th0, thb0) to provide data.
logger (11.04.2017 20:07:33): services paused.
logger (11.04.2017 20:07:33): chip authentication ok: 14
logger (11.04.2017 20:07:33): frequency band 915MHz (US)
logger (11.04.2017 20:09:29): give up waiting for sensors after 120 secs.
logger (11.04.2017 20:09:29): services activated.
logger (11.04.2017 20:12:34): restart meteostick (307 secs no valid rf signal)
logger (11.04.2017 20:17:36): restart meteostick (301 secs no valid rf signal)
logger (11.04.2017 20:22:38): restart meteostick (302 secs no valid rf signal)
logger (11.04.2017 20:27:39): message above repeats 1 time.
logger (11.04.2017 20:32:41): restart meteostick (301 secs no valid rf signal)
logger (11.04.2017 20:35:16): wind0 data incomplete (missing outdoor temp for windchill)
logger (11.04.2017 20:37:09): message above repeats 15 times.

Can you please give me remote login as described here:
viewtopic.php?f=57&t=9885

Please send URL and password to "info(at)meteobridge.com".

Done, check your email. Thanks for looking under the hood!

My MP is and has been running like a dream for 6 months but I have similar screen burn to that shown in your picture.