meteohub.de

Hi just set up Meteobridge PRO on the very first boot the screen came on and showed the IP address ever since the display has been black. Even during power-up and reboot. I have also set up an event definition under services that should show weather stats on the display but the display is always black. Is this a defective display or am I missing a setting?


This is new Meteobridge PRO from Ambient Weather purchased 08/02/17


Platform: Meteobridge PRO *
RAM: 61500 kB total, 16140 kB free (73% used)
Storage ATP: Internal 864 MB total, 855 MB free (1% used)
SW Version: Meteobridge 3.3 (Aug 11 2017, build 11361), FW 1.4
Uptime: 1 days, 14 hours, 50 minutes Buffer: 0 items (0%)
Power Data: 5.45V 348mA 1.90W (Box Climate: 48.0°C 14%)

Check the release page http://www.meteobridge.com/wiki/index.php/Forum for references to display etc as there are options to turn the screen off to save display burn out. In conjunction with this have a look at the [System] tab in the <Localization> area for Display Control: options