meteohub.de

Hello,

could anybody give me a note how to use the command to suppress empty lines in an export file?

I found the following in the tutorial: "#pragma emptyline=n" does even printout rows, when it is completely empty, which means it has no data. "emptyline=n" does not print out empty lines.

But when i insert it in the template nothing happens in the exported file. Nevertheless the empty lines are printed out.

Thanks
Bastian

Are the lines completely empty? If there are date and time stamps that is enough to regard the line non-empty. Can you please paste in an example?

Erratum: date and time stamps are not rendering a line being non-empty. I will have to get deeper into that.

Has been fixed with just released update.

Thank you, i will reboot the system to get the newest firmware.

But i am not sure how to handle the command in the template:

# Standard CSV template with data in metric units
#pragma emptyline=n
$# date, time, temperature[C], humidity[%], dew point[C], sealevel pressure[hPa], avg wind speed[m/s], gust speed[m/s], winddir, rainfall[mm]<BR>
[YYYY]-[MM]-[DD],[hh]:[mm],[th0temp-avg.1:],[th0hum-avg.0:],[th0dew-avg.1:],[thb0seapress-avg.1:],[wind0avgwind-avg.1:],[wind0wind-max.1:],..

or before the line:

# Standard CSV template with data in metric units
#
$# date, time, temperature[C], humidity[%], dew point[C], sealevel pressure[hPa], avg wind speed[m/s], gust speed[m/s], winddir, rainfall[mm]<BR>
#pragma emptyline=n [YYYY]-[MM]-[DD],[hh]:[mm],[th0temp-avg.1:],[th0hum-avg.0:],[th0dew-avg.1:],[thb0seapress-avg.1:],[wind0avgwind-avg.1:],...

Is this the right way? Could you give me an example?

Bastian wrote: ↑Tue Dec 04, 2018 8:44 am # Standard CSV template with data in metric units
#pragma emptyline=n
$# date, time, temperature[C], humidity[%], dew point[C], sealevel pressure[hPa], avg wind speed[m/s], gust speed[m/s], winddir, rainfall[mm]<BR>
[YYYY]-[MM]-[DD],[hh]:[mm],[th0temp-avg.1:],[th0hum-avg.0:],[th0dew-avg.1:],[thb0seapress-avg.1:],[wind0avgwind-avg.1:],[wind0wind-max.1:],.

Pragma statement needs to be in a separate line and is valid for all following lines. Please note that it is "emptylines" with "s" at the end.

Now it works! Thank you!