No reading of Vantage's internal logger
Posted: Wed Sep 04, 2024 1:31 pm
Hi,
I am really very satisfied with Meteobridge. However, there is one thing I would really like to see.
I wish Meteobridge could read the logger from my Davis Vantage Pro 2.
For example, when I restart to install a new update for MB, I always miss at least 1 minute of data afterwards.
Or if there’s a longer power outage, and my UPS system can’t bridge the gap, I sometimes lose several minutes to hours of data.
I used to have Meteohub, and with it, reading the data logger worked perfectly.
In the MB log, the following message appears upon startup:
logger (01.08.2024 08:49:16): station 0 (Vantage), no reading of Vantage's internal logger.
I would be happy if this feature could be added in an upcoming update.
I am using a Raspberry Pi 4.
Best regards
I am really very satisfied with Meteobridge. However, there is one thing I would really like to see.
I wish Meteobridge could read the logger from my Davis Vantage Pro 2.
For example, when I restart to install a new update for MB, I always miss at least 1 minute of data afterwards.
Or if there’s a longer power outage, and my UPS system can’t bridge the gap, I sometimes lose several minutes to hours of data.
I used to have Meteohub, and with it, reading the data logger worked perfectly.
In the MB log, the following message appears upon startup:
logger (01.08.2024 08:49:16): station 0 (Vantage), no reading of Vantage's internal logger.
I would be happy if this feature could be added in an upcoming update.
I am using a Raspberry Pi 4.
Best regards