Different pressure display between Meteohub and WS2355 station
Posted: Tue Aug 26, 2025 4:01 pm
Hello everybody
I have still a LaCrosse WS2355 connected to my Meteohub and there is a problem with the pressure rates displayed.
I recently set the pressure manually on the station to 1014.0 hPa (based on many official local stations) because I realised that my station for some reason was giving a pressure rate at least 2 hPa lower, but Meteohub keeps on displaying the previous rates and does not take the new fixed ones.
How could I make Meteohub get and display the exact same rates of pressure as they are displayed on the station? Keep in mind that I did not change the altitude settings for sea level pressure calculation or any other setting.
Thanks in advance
I have still a LaCrosse WS2355 connected to my Meteohub and there is a problem with the pressure rates displayed.
I recently set the pressure manually on the station to 1014.0 hPa (based on many official local stations) because I realised that my station for some reason was giving a pressure rate at least 2 hPa lower, but Meteohub keeps on displaying the previous rates and does not take the new fixed ones.
How could I make Meteohub get and display the exact same rates of pressure as they are displayed on the station? Keep in mind that I did not change the altitude settings for sea level pressure calculation or any other setting.
Thanks in advance