meteohub.de

MBPro (Oct 16 2025 Build 15629) uploading to WOW-BE shows constant Rainrate which is not correct.

There was a brief shower 0.4mm @ 03:37am 13/12/2025. Rain gauge is a metric 0.2mm Davis VP2 Spoon, rain resolution setting is 0.2mm

MBPro Min/Max Data tab Rain fall (Total amount) for Today (Sun 14) is 0.0mm Month Dec 0.4mm
Rain rate (hourly) Today all show 0.00, Month Dec (max) 1.4mm/h

It is currently Sunday Dec 14 @ 09:05 and WOW-BE Rainrate for every record since yesterday shows a rainrate of 0.51mm/h

Two issues I see here is the same ongoing continuous rainrate value (when it's not raining and has not rained today) and the value (0.51mm/h) itself. The connection I see to the 0.51mm/h would be an assumption of being 2 tips of an imperial 0.l" gauge => 0.2" * 0.254 => 0.508mm (0.51mm).

Also maybe a question for WOW-BE? They include a Rainrate but not a Raintotal in the primary icon list (Temp, Wind, Rainrate, Pressure, Rel Hum, Sol.Rad etc)? Yet under the Daily Observations tab there is a [Rainrate] panel with the values (which is for today only 14/12/25)
Maximum intensity 0.5mm/h
Total precipitation quantity 0.5mm
Precipitation duration 00s

## Update 17:30 14/12/25

@ 16:00 14/12/25 for some unexplained reason Rainrate drops to zero?

Further thoughts on this one. Can anybody see any logic in the Rain Rate continuation graph when there is no rain, No Rainrate?
For reference data is logging on both MBPro & Davis WLIP from the same ISS. For December total rainfall for both is 8.6mm (18/12), breakdown is
13/12 0.4mm
16/12 7.0mm
17/12 1.2mm (Noting there were four(4) separate and distinct short showers of 0.2mm each between 5 and 8pm on this day (17/12)
18/12 No Rain

8.13mm + 0.51mm => 8.64mm keeping in mind there is some rounding between recorded tips/imperial units with the Davis upload protocol.