meteohub.de

I've had my system up since February/March of this year, successfully sending data to CWOP and WU up until recently. A couple of weeks ago data seems to have stopped flowing. I tried power cycling and downgrading (and power cycling) the MB unit to version 6.2 all to no avail. When I look at the upload status on the Meteobridge management page, CWOP is giving me an error but WU shows data flowing:

no Weather Underground: 2026-07-12 11:26:49 Success: 2026-07-12 11:26:49
no Meteobridge Aurora: 2026-07-12 11:26:51 Success: 2026-07-12 11:26:49
no CWOP: 2026-07-12 11:25:29 Error: 2026-07-12 11:23:15 connection failed (no more tries)

When I login to the site management pages, neither WU nor CWOP shows data. The MB Pro2 is reading data fine from my instruments:

# Sensor Signal Metric Data Imperial Data
0 Indoor 47 sec 34.5°C 26% 1022.2hPa (994.9hPa) 94.1°F 26% 30.19inHg (29.38inHg)
1 Outdoor #8 9 sec 26.6°C 73% (dew21.4°C,hi26.6°C,wb22.9°C) 79.9°F 73% (dew70.5°F,hi79.9°F,wb73.2°F)
1 Air 19 sec 20.8µg/m³ 20.8µg/m³
1 Air #1 19 sec 20.7µg/m³ 20.7µg/m³
1 Air #2 19 sec 14.7µg/m³ 14.7µg/m³
9 Data #10 25 sec 24% system load 24% system load
9 Data #11 25 sec 311.5h uptime 311.5h uptime
9 Data #12 25 sec 1% data store usage 1% data store usage
9 Data #13 25 sec 58% RAM usage 58% RAM usage
9 Data #15 25 sec 65 processes 65 processes
9 Data #16 25 sec 10sec since last data 10sec since last data
9 Data #14 25 sec -0.03W power -0.03W power
9 Data #17 25 sec 5.22V voltage 5.22V voltage
9 Data #18 25 sec -0.01A current -0.01A current
9 System #9 25 sec 34.5°C 26% 1022.2hPa (994.9hPa) 94.1°F 26% 30.19inHg (29.38inHg)

Any ideas as to where I should start troubleshooting? I am at a loss to understand what is going on here.