Page 1 of 1

MB Pro 2 loses Davis station RF reception

Posted: Sun Nov 15, 2026 2:48 pm
by Tman
Hi

Version 6.3 has been stable, ie Davis RF reception has worked well.

Since updating to 6.4 (merely because of WS40 V2 direct support), RF reception drops once in a while.

Reboot log
logger (15.11.2026 14:43:08): waiting for sensors (wind0, rain0, th0, thb0) to provide data.
logger (15.11.2026 14:43:08): services paused.
logger (15.11.2026 14:43:13): station 0 (RF Vantage), transmitter 1 registered as ISS
logger (15.11.2026 14:43:13): station 0 (RF Vantage), initialization string sent to device /dev/ttyS0: V d0 v0 o0 o3 f1 x180 t1 b0 m1
logger (15.11.2026 14:43:13): station 0 (RF Vantage), MBPRO2RF Version 2.4
logger (15.11.2026 14:43:13): station 0 (RF Vantage), debug off
logger (15.11.2026 14:43:13): station 0 (RF Vantage), verbose off
logger (15.11.2026 14:43:13): station 0 (RF Vantage), output raw
logger (15.11.2026 14:43:13): station 0 (RF Vantage), output raw (10 bytes)
logger (15.11.2026 14:43:13): station 0 (RF Vantage), filter on
logger (15.11.2026 14:43:13): station 0 (RF Vantage), rx threshold set to -90db
logger (15.11.2026 14:43:13): station 0 (RF Vantage), listening to tx 1
logger (15.11.2026 14:43:13): station 0 (RF Vantage), bandwidth narrow
logger (15.11.2026 14:43:13): station 0 (RF Vantage), frequency band 868MHz (EU)
dbase (15.11.2026 14:43:16): database sync done (52 tables, 38/2683 writes).
logger (15.11.2026 14:44:19): sensors are now providing data.
logger (15.11.2026 14:44:19): services started.
BR - Timo

Re: MB Pro 2 loses Davis station RF reception

Posted: Sun Nov 15, 2026 11:22 pm
by Mattk
Your sensitivity is set rather high -90db? What is your typical signal strength on Live Data?