several service issues *solved*
Posted: Fri Aug 15, 2008 4:02 am
I was having some issues so I decided to start over with a fresh upgrade to 2.3 firmware, 2.6 2GB image, and then a software upgrade to 2.7. I noticed right off the bat that I could not connect to the web interface on port 80 only on 7777. The device is no longer listening on 80. I checked the config in the web ui and the port is still set to 80.
In addition I also noticed that the sensors info page (and several others) are not working with a similar kind of error
"error connect socket 127.0.0.1:5555
:Connection refused"
Sensors cannot be displayed because data logging process has been halted.
Verifying from SSH you can see that neither of those ports are being used.
tcp 0 0 0.0.0.0:7777 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:873 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN
netstat: no support for `AF INET6 (tcp)' on this system.
udp 0 0 10.1.1.246:137 0.0.0.0:*
udp 0 0 192.168.1.77:137 0.0.0.0:*
udp 0 0 0.0.0.0:137 0.0.0.0:*
udp 0 0 10.1.1.246:138 0.0.0.0:*
udp 0 0 192.168.1.77:138 0.0.0.0:*
udp 0 0 0.0.0.0:138 0.0.0.0:*
udp 0 0 0.0.0.0:111 0.0.0.0:*
udp 0 0 192.168.1.77:123 0.0.0.0:*
udp 0 0 10.1.1.246:123 0.0.0.0:*
udp 0 0 127.0.0.1:123 0.0.0.0:*
udp 0 0 0.0.0.0:123 0.0.0.0:*
Any suggestions? Here's my info screen:
Linux Kernel: 2.6.21.7 132 BogoMIPS, 30 MB RAM, NSLU2 (133MHz)
MeteoHub: Version 2.6 (c)2008 by Boris Pasternak, info@meteohub.de
Activation Code: REMOVED FROM POST activated
Network
Hostname: meteohub
Workgroup: HOME
MAC: 00:0F:66:7B:F6:9D
IP: 10.1.1.246
Gateway: 10.1.1.1
DNS: 10.1.1.1
WAN IP: REMOVED FROM POST
Storage
Swap: 0MB of 127MB used (0%)
System: 211MB of 402MB used (52%)
Data: 32MB of 1322MB used (2%)
Date and Time
UTC: 15.08.2008 02:03:05
Time Zone: America/Phoenix
Local Time: 14.08.2008 19:03:05
Uptime: 0 hours, 8 minutes
System Load: 0.07, 0.27, 0.20
Process
Weather Data Recomputation: completed
Weather Data Logging: running (last data: never)
SSH Login: running
SMB Shares: running
Time Synchonization: running
In addition I also noticed that the sensors info page (and several others) are not working with a similar kind of error
"error connect socket 127.0.0.1:5555
:Connection refused"
Sensors cannot be displayed because data logging process has been halted.
Verifying from SSH you can see that neither of those ports are being used.
tcp 0 0 0.0.0.0:7777 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:873 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN
netstat: no support for `AF INET6 (tcp)' on this system.
udp 0 0 10.1.1.246:137 0.0.0.0:*
udp 0 0 192.168.1.77:137 0.0.0.0:*
udp 0 0 0.0.0.0:137 0.0.0.0:*
udp 0 0 10.1.1.246:138 0.0.0.0:*
udp 0 0 192.168.1.77:138 0.0.0.0:*
udp 0 0 0.0.0.0:138 0.0.0.0:*
udp 0 0 0.0.0.0:111 0.0.0.0:*
udp 0 0 192.168.1.77:123 0.0.0.0:*
udp 0 0 10.1.1.246:123 0.0.0.0:*
udp 0 0 127.0.0.1:123 0.0.0.0:*
udp 0 0 0.0.0.0:123 0.0.0.0:*
Any suggestions? Here's my info screen:
Linux Kernel: 2.6.21.7 132 BogoMIPS, 30 MB RAM, NSLU2 (133MHz)
MeteoHub: Version 2.6 (c)2008 by Boris Pasternak, info@meteohub.de
Activation Code: REMOVED FROM POST activated
Network
Hostname: meteohub
Workgroup: HOME
MAC: 00:0F:66:7B:F6:9D
IP: 10.1.1.246
Gateway: 10.1.1.1
DNS: 10.1.1.1
WAN IP: REMOVED FROM POST
Storage
Swap: 0MB of 127MB used (0%)
System: 211MB of 402MB used (52%)
Data: 32MB of 1322MB used (2%)
Date and Time
UTC: 15.08.2008 02:03:05
Time Zone: America/Phoenix
Local Time: 14.08.2008 19:03:05
Uptime: 0 hours, 8 minutes
System Load: 0.07, 0.27, 0.20
Process
Weather Data Recomputation: completed
Weather Data Logging: running (last data: never)
SSH Login: running
SMB Shares: running
Time Synchonization: running