Page 1 of 1

config meteohub with wswin

Posted: Sat Mar 07, 2009 12:37 pm
by pasquaccino
how can i configurate the meteohub with wswin?
thank you

Re:config meteohub with wswin

Posted: Sun Mar 08, 2009 9:27 am
by pasquaccino
please help me

Re:config meteohub with wswin

Posted: Sun Mar 08, 2009 4:49 pm
by skyewright
pasquaccino wrote:how can i configurate the meteohub with wswin?
Have you already tried following the instructions in the Meteohub manual?

In the English version of the v4.0 manual PDF the WSWIN Data Export section starts on page 55.

Re:config meteohub with wswin

Posted: Mon Mar 09, 2009 7:53 am
by pasquaccino
yes but nothing ! i will want to know the process.

Re:config meteohub with wswin

Posted: Fri Apr 17, 2009 1:41 am
by ON1DQD
Hi,

I also have a problem to get it to work.

How do you setup that WSWIN go look for the files at \\\\METEOHUB\\public\\export ????

WSWIN can't read this information it hangs.

All help is welcome.

Thnaks,
ON1DQD

Re:config meteohub with wswin

Posted: Fri Apr 17, 2009 11:43 am
by skyewright
ON1DQD wrote:WSWIN can't read this information it hangs.
It's so long since I set this up I forget (and reading the English translation of the WSWIN manual is not always easy), but:

1) The first reading of the data is likely to take quite a while.
2) Somewhere in the set up there is an option to only check and read the data periodically, e.g. every 5 minutes or 10 minutes (10 minutes is what I use).

Ah. Found it.

File => Options => Warning/Pause => Pause.

Here's a quote from the WSWIN help file (English verson).
From V2.85.0, also a "passive operation" or also called Pause operation is supported.

The difference to the normal operating mode = recording, exists, that the program becomes "active" only in the here put in interval and picks up data on that occasion, while constantly at the "active operation", the program accordingly the record interval's the interfaces polls.

This operating mode is not suitable for the WM918, WMR9x8-stations, only for weather station types with data logger (WS2000, WS2500, VantagePro) and in the operating mode "File-Watching". If you have problems with the active file watching, you should energize the Pause operating mode here by way of experiment.

PC-Weatherstation

Do you have that set, or are you trying to read continuously?

If that doesn't help, the WSWIN forum might be a good place to ask for more detail of how to set up the WSWIN end?

Re:config meteohub with wswin

Posted: Fri Apr 17, 2009 1:33 pm
by ON1DQD
Hi skyewright,

Thanks for the help!

I'm gonna ask this in WSWIN forum on how to setup with MeteoHub.

Thanks again.

Re:config meteohub with wswin

Posted: Sat Apr 18, 2009 11:26 pm
by ON1DQD
I can't get it to work!

Schould be an step-by-step tutorial on how to setup at WSWIN website but nothing.

CRAP...

Re:config meteohub with wswin

Posted: Sun Apr 19, 2009 12:32 pm
by skyewright
Being abusive is not a good way to get help.

The problem you are having seems to be a matter of WSWIN configuration. Have you asked on the WSWIN forum? There are a substantial number of Meteohub users there (including the WSWIN developer I think?).

Re:config meteohub with wswin

Posted: Sun Apr 19, 2009 2:29 pm
by wfpost
skyewright wrote:Being abusive is not a good way to get help.

The problem you are having seems to be a matter of WSWIN configuration. Have you asked on the WSWIN forum? There are a substantial number of Meteohub users there (including the WSWIN developer I think?).
it looks like an UNC problem.

First of all meteohubs export drive should be mapped to a local network drive.
e.g. on my notebook \\\\meteohub\\public is mapped to M:/
Then it works together with wswin.

Because the local user meteohub isn“t available on the local wswin machine user/password credits have to be entered again every time the network mapping is lost, I use the very handy net use command to automatically remap meteohub drive, my wswin machine is booted.
Also be aware that WINDOWS is using the current logon username for external network drives;)

create a link and put this into autostart

Code: Select all

net use m: \\\\meteohub\\public meteohub /user:meteohub
[img=http://img134.imagevenue.com/loc803/th_ ... _803lo.jpg]

Re:config meteohub with wswin

Posted: Tue Apr 21, 2009 4:42 am
by FishAlaska
Where can I get WSWIN? Is it English?

Re:config meteohub with wswin

Posted: Tue Apr 21, 2009 11:40 am
by skyewright
FishAlaska wrote:Where can I get WSWIN? Is it English?
www.pc-wetterstation.de
The author is German, but he does speak/write English. The program can be run "in English". The support Forum mainly uses German, but English is acceptable. There an English language version of the help / manual. The translation is a little "interesting" in places...

Well worth a try. :)