meteohub.de

Hello,

Station davis VP2 calculate ET "evapotranspiration" I wanted to know if we could display on Meteohub then after sending data WSWIN

Thank you

Guten Abend

Niemand hat mir eine Antwort

entschuldigen Sie mich zum Schreiben, weil ich einen Übersetzer von Treibhausgasen bin

Hi,

I think it's not completely clear what you are looking for; MH is already reporting ET:
(my Davis sensor is sol4)

actual_sol4_evotranspiration_inch 0.00
actual_sol4_evotranspiration_mm 0.0

Ysbrand

Hello yjb

Will you explain how to configure it to ET in Meteohub

because I start in this software

I'm here to sol4



but where I should put the two lines

actual_sol4_evotranspiration_inch 0.00
actual_sol4_evotranspiration_mm 0.0

Thank you for your help

You will not see those values on the sensors screen, but you can get those from the html output:

http://<meteohub>/meteograph.cgi?text=actual_sol0_evotranspiration_inch
and
http://<meteohub>/meteograph.cgi?text=actual_sol0_evotranspiration_mm

You can find more about this in the meteohub manual (section 3.2 for example)

I have to configure a front sensors

if so how

ok I understood

It works for the day
http://<meteohub>/meteograph.cgi?text=actual_sol0_evotranspiration_mm

But when I want the value of the month
http://<meteohub>/meteograph.cgi?text=month1_sol0_evotranspiration_mm

It does not work

Hi,

This is correct, currently the only ET numbers available are the actual ones. If you are looking for more options (which do make sense in my opinion, your best bet is to put a request in the "wishes" forum.

There is one challenge, the ET as provided by Davis is a cumulative number, so I guess you will be restricted to "end of day" statistics, last 24 hours, last 6 hours etc will not make sense.

Ysbrand

Hi,

ok I thank you for your help

I'll wait a bit to make a request on the forum because I think the next update to incorporate it in Meteohub

"Adds experimental support for plotting graphs based on evapotranspiration (when your Vantage reports this value). "

Hello

Is what we can send data with this link in evapotranspiration WSWIN

http://<meteohub>/meteograph.cgi?text=actual_sol0_evotranspiration_mm

thank you for your reply

Hi there,

I tried to get the ET-Value into a HTML file located in directory graphs as

but I don't get a value...

What am I doing wrong?

I got it
By now to find at my weatherpage

If it does not signal the IP with the buzzer after boot, the USB stick ist most propably damaged.
You might need to setup a new USB stick.






























__________________________________________________________
China products China Tablet PC brand from china