Update 4.8c
Posted: Sun Sep 25, 2011 7:43 pm
Update to Meteohub V4.8c (NSLU2, x86, SheevaPlug, DreamPlug) brings these features:
- brings support for Lufft WS600 plus ANACON solar radiation sensor to production level. Station has to be configured to provide data on following channels:
- class 7, id 1, channel 100: temperature in degrees celsius
- class 7, id 1, channel 110: dew point in degrees celsius
- class 7, id 1, channel 200: relative humidity in %
- class 7, id 1, channel 300: pressure in hpa
- class 7, id 1, channel 305: sealevel pressure in hpa
- class 7, id 1, channel 460: average wind speed in m/s
- class 7, id 1, channel 400: wind speed in m/s
- class 7, id 1, channel 500: wind direction in degrees
- class 7, id 1, channel 700: precipitation flag: 0 none, 60 rain, 70 snow
- class 7, id 1, channel 600: rain total mm
- class 7, id 1, channel 1053: rain rate mm/h
- class 6, id 1, channel 900: solar radiation in wqm
- When multiple WS600 are used a distinct "id" can be selected by adding "#" followed by id number to serial device specifier (example "/dev/ttyUSB0#3" selects station with "id 3")