meteohub.de

Hi Boris, I'm going step by step through all Meteohub functionalities on DC01.
I got the message:
DC01 Time Synchonization: stopped

The System Info shows
Process
Weather Data Recomputation: completed
Weather Data Logging: running (last data: 34 sec)
SSH Login: running
SMB Shares: running
Time Synchonization: stopped

In addition the last few lines of ntp client log (maybe this might be helpful)

26 Apr 11:56:39 ntpd[1808]: ntpd exiting on signal 15
26 Apr 13:58:26 ntpd[724]: Deferring DNS for 0.pool.ntp.org 1
26 Apr 13:58:46 ntpd[724]: Deferring DNS for 1.pool.ntp.org 1
26 Apr 13:58:46 ntpd[1104]: signal_no_reset: signal 17 had flags 4000000
26 Apr 13:58:58 ntpd[1104]: host name not found: 0.pool.ntp.org
26 Apr 13:58:58 ntpd[1104]: host name not found: 1.pool.ntp.org
26 Apr 13:59:11 ntpd[724]: ntpd exiting on signal 15
26 Apr 13:59:22 ntpd[1615]: Listen normally on 6 eth0:0 192.168.1.77 UDP 123
26 Apr 13:59:28 ntpd[1104]: parent died before we finished, exiting

regards Billy

After some recomputation Time Synchonization: started again.
Don't know why. Will have a look on that!

Billy wrote: 26 Apr 13:58:58 ntpd[1104]: host name not found: 0.pool.ntp.org
26 Apr 13:58:58 ntpd[1104]: host name not found: 1.pool.ntp.org

Hello Billy,

your MH had problems to resolve the hostname of the timeservers.
There was probably an issue with your network connection and/or DNS-resolution. After a time the ntp process could determine the IP of the ntp server and started again.

Andy

looks more like bug to me ---
viewtopic.php?f=8&t=8884&p=11892&hilit=dhcp#p11892

only in German, but in short it seems with DHCP enabled there´s a problem with NTP which does not occur using static IP

Thanks a lot for your comments.

Not yet reproducible for me.
Time Synchonization: running now since yesterday twelve o'clock

Nevertheless the last ntp entry was later
26 Apr 16:00:59 ntpd[1563]: Listen normally on 6 eth0:0 192.168.1.77 UDP 123
26 Apr 16:01:00 ntpd[1563]: ntpd exiting on signal 15
26 Apr 16:01:07 ntpd[1103]: parent died before we finished, exiting

@wfpost you are right

Ethernet Adapter is set to DHCP for WLAN

My DC01 testing will go on!

Billy