DC01 stops uploading data on wifi, fine on wired connection
Posted: Sun Aug 05, 2012 2:10 pm
I recently purchased a Weatherhub4 from Ambient Weather to upload data from my Davis Vantage Pro 2 station to Wunderground.com. I had no trouble configuring it and getting it to upload with the unit cabled directly to my router. It ran flawlessly for a day, then I followed the instructions to use the included d-link USB adapter to put it on my wifi network. That also went fine, except I found that I had to broadcast the SSID for it to work. Even with the SSID set in the config it would stop transmitting if I hid the SSID at the router. Anyway, after a couple of hours it stopped uploading to wunderground.com and I found these errors in the logs:
2012.08.04 03:27:11 meteohub: weathernet: No data upload to weather networks as sensor selected on weather network page for outdoor temp, outdoor humidity or outdoor dewpoint is not providing recent data.:
2012.08.04 03:32:15 meteohub: weathernet: No data upload to weather networks as sensor selected on weather network page for outdoor temp, outdoor humidity or outdoor dewpoint is not providing recent data.:
2012.08.04 03:37:15 meteohub: weathernet: No data upload to weather networks as sensor selected on weather network page for outdoor temp, outdoor humidity or outdoor dewpoint is not providing recent data.:
2012.08.04 03:42:11 meteohub: weathernet: No data upload to weather networks as sensor selected on weather network page for outdoor temp, outdoor humidity or outdoor dewpoint is not providing recent data.:
2012.08.04 03:47:03 meteohub: weathernet: No data upload to weather networks as sensor selected on weather network page for outdoor temp, outdoor humidity or outdoor dewpoint is not providing recent data.:
2012.08.04 03:52:08 meteohub: weathernet: No data upload to weather networks as sensor selected on weather network page for outdoor temp, outdoor humidity or outdoor dewpoint is not providing recent data.:
I double checked the network config, the sensor config and the weather networks config and it all looked fine. I went back to the wired connection and it ran fine for 5 days. I gave it one more try on wifi, got the same error and no upload, and am now back on wired and working fine. I really don't think there's an error in the configuration because it works fine when the unit is cabled to the router. When it's on wifi it's definitely still connected to the network - I have no trouble finding the IP and using a browser to remote into the device. I will add a few more screenshots in a reply to this post since the limit is three.
Any help or suggestions would be much appreciated. While I can just continue to run the unit wired it's taking the last open port on my router and I would really like to be able to move it around without running cat6 or buying a powerline adapter for the unit.
Thanks.
2012.08.04 03:27:11 meteohub: weathernet: No data upload to weather networks as sensor selected on weather network page for outdoor temp, outdoor humidity or outdoor dewpoint is not providing recent data.:
2012.08.04 03:32:15 meteohub: weathernet: No data upload to weather networks as sensor selected on weather network page for outdoor temp, outdoor humidity or outdoor dewpoint is not providing recent data.:
2012.08.04 03:37:15 meteohub: weathernet: No data upload to weather networks as sensor selected on weather network page for outdoor temp, outdoor humidity or outdoor dewpoint is not providing recent data.:
2012.08.04 03:42:11 meteohub: weathernet: No data upload to weather networks as sensor selected on weather network page for outdoor temp, outdoor humidity or outdoor dewpoint is not providing recent data.:
2012.08.04 03:47:03 meteohub: weathernet: No data upload to weather networks as sensor selected on weather network page for outdoor temp, outdoor humidity or outdoor dewpoint is not providing recent data.:
2012.08.04 03:52:08 meteohub: weathernet: No data upload to weather networks as sensor selected on weather network page for outdoor temp, outdoor humidity or outdoor dewpoint is not providing recent data.:
I double checked the network config, the sensor config and the weather networks config and it all looked fine. I went back to the wired connection and it ran fine for 5 days. I gave it one more try on wifi, got the same error and no upload, and am now back on wired and working fine. I really don't think there's an error in the configuration because it works fine when the unit is cabled to the router. When it's on wifi it's definitely still connected to the network - I have no trouble finding the IP and using a browser to remote into the device. I will add a few more screenshots in a reply to this post since the limit is three.
Any help or suggestions would be much appreciated. While I can just continue to run the unit wired it's taking the last open port on my router and I would really like to be able to move it around without running cat6 or buying a powerline adapter for the unit.
Thanks.