meteohub.de

Hello,

I connected a new Davis Envoy with a Fjord Technology Datenlogger DL2.0 USB to my ALIX.3D2 with meteohub 4.9q
All looks fine, the Vantage was recognized an the senor data are transferred:

Here a abstract from the meteohub.log:

logger (13.10.2012 16:58:29): station 2 (Vantage), wakeup sent.
logger (13.10.2012 16:58:29): station 2 (Vantage), internal logger activated.
logger (13.10.2012 16:58:29): station 2 (Vantage), syncing.
logger (13.10.2012 16:58:39): station 2 (Vantage), gettime request sent.
logger (13.10.2012 16:58:39): station 2 (Vantage), no Vantage time offset.
logger (13.10.2012 16:58:39): station 2 (Vantage), eeprom request sent.
logger (13.10.2012 16:58:39): station 2 (Vantage), rain collector size 0.2 mm per tick.
logger (13.10.2012 16:58:39): station 2 (Vantage), transmitter 6 active as station type (#0) "ISS".
logger (13.10.2012 16:58:39): station 2 (Vantage), transmitter 7 active as station type (#4) "Wireless Anemometer".
logger (13.10.2012 16:58:39): station 2 (Vantage), no reading of Vantage's internal logger as time stamps of logged data appear being invalid.

But the last line did not looks normal.
In there someone you knows the sense of the message and what can I do to make the time stamps valid?


Regards Klaus

Hello,

here the solution. I had no sensor defined for this weatherstation.

After I defined one sensor on the sensor page the data logging process was restarted and in the meteohub.log I got the expected message:

logger (14.10.2012 17:22:40): station 2 (Vantage), no reading of Vantage's internal logger as data gap is less than 10 minutes: 45 secs


Regards Klaus

thanks for the solution.