meteohub.de

Hi all,

Running meteohub at the moment with my vantage Pro 2 station that has extra stations and a soil/leaf station.

The extra stations/sensors I have are:-
Extra Temp/Humid Station
extra temperature station
Leaf soil station that has 4 temperatre probes, 2 soil moisture probes and 2 leaf sensors.


I cant seem to be able to get weather display to recognise some of these sensors, the humidity's and all the soil station ones.

Does anyone know here how I can get WD to see and log these?

I have my meteohub setup like this:-

Wind (wind0)
rain (rain0)
indoor (thb0)
outdoor (th0)
extra-1 (th1) - temp/humid station
extra-2 (th2) - temp station
soil-3 (th10)
soil-4 (th11)
leaf-1 (th15)
leaf-2 (th16)
uv (uv0)
solar (sol0)

I have tried the weather-watch forum but no luck so far, so I am hoping I may get lucky here.

One other thing I have just noticed, I have 2 soil moistures currently reading 67cb and 150cb.
I see in the output (http://192.168.1.xxx/meteolog.cgi?mode=data) the moisture 67cb but the other moisture reading is 100cb, I presume meteohub tops these readings out at 100, and not the actual maximum of 200cb?
Many thanks!

stu

This is now all sorted thanks to Brian at Weather Display!!