meteohub.de

Hi everyone. Over the past years, I have had four Davis weather stations installed for four friends of mine who live in my city. At one of these four stations, I also had Airlink installed (the Davis device for monitoring air quality). I would like to display the Airlink data on the website of a ...

admin wrote: Thu Oct 28, 2021 11:00 am Something with the USB connection to the logger is instable.

Code: Select all

logger (25.10.2021 14:59:10): station 0 (Vantage), can't open device /dev/ttyMH: No such file or directory

This is not a SW but a HW issue.

Any suggestion? Please... Even buy some new hardware, like console or datalogger...

Hello everyone, I would like to submit to you a problem that I have been experiencing for some time with a meteobridge that I have personally configured starting from a TP-LINK TL-MR3020v3.

This meteobridge transmits data from a Davis Vantage Pro 2 online and apparently works fine. The weather ...

Sorry for my English. Power whatever, that wasn't the point.
I've tried with an original Raspberry 2.5 A power stuff, with no result. Same problem. I solved with Meteobridge.

Thank you but it was not the power charger. I've decided to go meteobridge. Solved.

I've realized that the Raspberry's USB power charger I'm using is only 1 Ampere. Should it be the problem? Tonight I'll try a 2.5 A power charger.

Yes, this is a new installation.

I'm a very old user of meteohub and meteobridge, as I'm part of an Italian weather network and so I manage a lot of different weather stations. This one is new!

I decided to use Meteohub because, before this Raspberry Pi, the real owner of this installation used to ...

Hello everyone, I am writing to ask you for help. I have a Davis Vantage Pro2 connected to a meteohub installed on Raspberry Pi Model 3:

Linux Kernel: 4.4.27 2000 BogoMIPS, 947 MB RAM, Raspberry PI Model 3
MeteoHub: 5.1e (Build 276) ©2020 by smartbedded GmbH
System ID: xxxxxxxxxxx activated

A ...

I think I solved. It was very hard, I've tried to reset the weather station and the datalogger rebooting the console several times.

Hi. I have a problem with my Meteohub.
I have a Vantage Vue, the station works properly but I can't put my data on the web.

Here some infos:

Linux Kernel: 3.18.8+ 697 BogoMIPS, 445 MB RAM, Raspberry PI Model B
MeteoHub: 5.0s (Build 182) ©2015 by smartbedded UG (haftungsbeschränkt)
System ID ...

The weather station is quite far from my place, so I'd prefer not to go there in order to fix this problem.

Can I send to the weather station's owner a cloned sd card, ready to make the raspberry pi work just inserting the card in it?

admin wrote:Can you update to "5.0p" via "update (auto)" function on "maintenance" page?
If that also fails it looks like your SD card cannot take any writes anymore and needs a replacement.

Drama

Hi. I use a Raspberry Pi. Info:

Linux Kernel: 3.18.8+ 697 BogoMIPS, 445 MB RAM, Raspberry PI Model B+
MeteoHub: 5.0f (Build 69) ©2014 by smartbedded UG (haftungsbeschränkt)
System ID: @m7lafT2 activated

MAC: B8:27:EB:A6:E0:47

Media: unknown (1.01 rounds)
Swap: 0MB of 127MB used (0%)
System ...

Looks like the file system on your SD card is damaged,
which unfortunately happens here and there on the RPI.

Can you suggest me a solution?
Simply: regular backups, new sd-card and new install ;)

Do you know a brand of safe SD Card?

The weather station I'm asking help for is very far apart ...

admin wrote:Looks like the file system on your SD card is damaged,
which unfortunately happens here and there on the RPI.

Can you suggest me a solution?