Rain Data Error after update

[bfullerpe]

On April 9 I updated the system to 4.9f. Recently when we started getting rain storms I noticed that the rainfall data is not being gathered and pushed to weather networks. The data shows as 0.01inches all the time. During a rain storm yesterday evening the weather station was showing the rainfall amount and rate but meteohub never showed that data. Today i upgraded to 4.9k hoping that would resolve the issue. After that did not work i disconnected the data logger from meteohub and connected to the computer. I then went thru and inspected the data and the information from yesterday's rain was all in there.

Weather Station Davis Vantage Pro2
Here is a link to weather underground that shows the data stream (station ID: KNMSILVE14) http://www.wunderground.com/weatherstat ... KNMSILVE14

Brian

[wfpost]

maybe the known issue:
usb stick starts to die on NSLU2

dozens on entries with the forum >>>> viewtopic.php?f=2&t=8160
viewforum.php?f=2

did you check meteohubs error logs?

[bfullerpe]

Placed a new USB stick in and got everything back up and running. The same issue is still happening.

I also checked the log files and didn't find any errors or issues.

[bfullerpe]

I might have accidently resolved the issue. On the weather networks page I zeroed out the rain sensor so the data was not being pushed. The next morning I decided to try and inspect the data I also decided to sent the rain sensor to push the weather networks. I then checked online and found that the data was showing rain back to 0"/hr. If it rains this afternoon i can confirm if the data is being passed correctly.

[bfullerpe]

I resolved future problems with bugs and glitches by removing meteohub out of the system. Replaced with data logger by Davis using the weatherlinkip. Connected directly to LAN and published to weatherlink web page.

[johncena]

t have accidently resolved the issue. On the weather networks page I zeroed out the rain sensor so the data was not being pushed. The next morning I decided to try and inspect the data I also decided to sent the rain sensor to push the weather networks. I then checked online and found that the data was showing rain back to 0"/hr. If it rains this afternoon i can confirm if