Datalogger timeout [Solved]

[Clément]

Hello guys,

I have a problem with a MeteoBridge.
It doesn't connect to the datalogger. I don't know why...

Here is the sytem log:

Code: Select all

wnetd (18.02.2015 19:28:24): process started.
test5m (18.02.2015 19:28:27): logger stalled, will be restarted now
logger (18.02.2015 19:28:27): No historical data loaded.
logger (18.02.2015 19:28:27): data logger (version 5.0d, build 5958) started.
logger (18.02.2015 19:28:28): connect station 0 (Vantage via USB serial).
logger (18.02.2015 19:28:29): wakeup sent.
logger (18.02.2015 19:28:29): internal logger activated.
logger (18.02.2015 19:28:29): syncing.
logger (18.02.2015 19:28:38): gettime request sent.
logger (18.02.2015 19:28:48): gettime request sent.
logger (18.02.2015 19:28:58): gettime request sent.
logger (18.02.2015 19:29:08): disconnect station 0 (Vantage): timeout
logger (18.02.2015 19:29:38): connect station 0 (Vantage via USB serial).
logger (18.02.2015 19:29:38): wakeup sent.
logger (18.02.2015 19:29:38): internal logger activated.
logger (18.02.2015 19:29:38): syncing.
logger (18.02.2015 19:29:48): gettime request sent.
logger (18.02.2015 19:29:58): gettime request sent.
logger (18.02.2015 19:30:08): gettime request sent.
logger (18.02.2015 19:30:18): disconnect station 0 (Vantage): timeout
logger (18.02.2015 19:30:48): connect station 0 (Vantage via USB serial).
logger (18.02.2015 19:30:49): wakeup sent.
logger (18.02.2015 19:30:49): internal logger activated.
logger (18.02.2015 19:30:49): syncing.
logger (18.02.2015 19:30:58): gettime request sent.
logger (18.02.2015 19:31:08): gettime request sent.
logger (18.02.2015 19:31:18): gettime request sent.
logger (18.02.2015 19:31:28): disconnect station 0 (Vantage): timeout
logger (18.02.2015 19:31:58): connect station 0 (Vantage via USB serial).
logger (18.02.2015 19:31:59): wakeup sent.
logger (18.02.2015 19:31:59): internal logger activated.
logger (18.02.2015 19:31:59): syncing.
logger (18.02.2015 19:32:08): gettime request sent.
logger (18.02.2015 19:32:18): gettime request sent.
logger (18.02.2015 19:32:28): gettime request sent.
logger (18.02.2015 19:32:38): disconnect station 0 (Vantage): timeout
logger (18.02.2015 19:33:08): connect station 0 (Vantage via USB serial).
logger (18.02.2015 19:33:09): wakeup sent.
logger (18.02.2015 19:33:09): internal logger activated.
logger (18.02.2015 19:33:09): syncing.
logger (18.02.2015 19:33:18): gettime request sent.
logger (18.02.2015 19:33:28): gettime request sent.
logger (18.02.2015 19:33:38): gettime request sent.
logger (18.02.2015 19:33:48): disconnect station 0 (Vantage): timeout
logger (18.02.2015 19:33:50): usb port reset.
logger (18.02.2015 19:34:18): station 0 (Vantage), can't open device /dev/ttyMH: No such file or directory
logger (18.02.2015 19:34:48): station 0 (Vantage), can't open device /dev/ttyMH: No such file or directory
logger (18.02.2015 19:35:18): station 0 (Vantage), can't open device /dev/ttyMH: No such file or directory
logger (18.02.2015 19:35:49): connect station 0 (Vantage via USB serial).
logger (18.02.2015 19:35:50): wakeup sent.
logger (18.02.2015 19:35:50): internal logger activated.
logger (18.02.2015 19:35:50): syncing.
logger (18.02.2015 19:35:58): gettime request sent.

It seems that it can see the datalogger but cannot connect to it.
Any advices?

Thank you very much.

Regards.

[Clément]

I solved the problem...

It was a misconfiguration in the serial baudrate settings.