Please help me troubleshoot no valid RF signal

This section covers the Meteobridge PRO, PRO2, NANO SD, Raspberry Pi and VM platforms exclusively

Moderator: Mattk

lentas
Fresh Boarder
Fresh Boarder
Posts: 17
Joined: Mon Feb 08, 2010 8:03 am

Re: Please help me troubleshoot no valid RF signal

Post by lentas »

Thx for the hint Boris, but the retransmitting is only possible for the ISS, not for Soil/Leaf Wetness or Anemometer Transmitter Box, right?
I have Problems with very low reception quality, my stations are around 100m away. readings are -100db or lower. But i have a repeater here, can Meteostick read the repeater?
Which settings should i set?
User avatar
admin
Platinum Boarder
Platinum Boarder
Posts: 7854
Joined: Mon Oct 01, 2007 10:51 pm

Re: Please help me troubleshoot no valid RF signal

Post by admin »

Meteostick and MB PRO can handle Davis repeater signals. Nothing special to be configured.
besty1967
Fresh Boarder
Fresh Boarder
Posts: 7
Joined: Sat Jun 24, 2017 1:53 pm

Re: Please help me troubleshoot no valid RF signal

Post by besty1967 »

I'm having a similar problem, I've got the Vue console retransmitting and the sb-04 set for the same channel but not showing any data on the rf screen. Set to normal and tried various settings for the rf sens. The console for the Vue ne the sb-04 are about 10cm apart. The Vue console receives the signal from the iss with no problems at a distance of approximately 4 metres through a brick wall.
Any help greatly appreciated.
Post Reply