Rain and Wind data realtime

This section covers the Meteobridge PRO units exclusively

Moderator: Mattk

Post Reply
metchab
Fresh Boarder
Fresh Boarder
Posts: 3
Joined: Fri Dec 21, 2018 5:11 pm

Rain and Wind data realtime

Post by metchab » Wed Dec 26, 2018 7:45 pm

Hi,

hopefully my english is good enough
i am new here, i have MeteoBridge Pro and i read a lot to find out a way to bring rain (by starting) and Wind in realtime to my Homeautomation system (Loxone)
Due Loxone limitation http commands to fetch this data from MBP are time limited by 10 seconds shortest. For awing controls i need the the values as soon as they are detected
under services i did not find a way to solve this
In the i moment i use Ambient Weather WH14xx (16 seconds refresh rate is too long) quick transmission ist possible i planing with Davis vantage Pro2 oder Lufft WS, both have very shorter refresh rate

thank you for help

ruzzi.f@gmail.com
Junior Boarder
Junior Boarder
Posts: 25
Joined: Sat Dec 30, 2017 8:43 pm

Re: Rain and Wind data realtime

Post by ruzzi.f@gmail.com » Thu Feb 07, 2019 10:00 am

hi
i have same need and i used the http get service

ruzzi.f@gmail.com
Junior Boarder
Junior Boarder
Posts: 25
Joined: Sat Dec 30, 2017 8:43 pm

Re: Rain and Wind data realtime

Post by ruzzi.f@gmail.com » Thu Feb 07, 2019 10:00 am

i am updatind data every 5 seconds

metchab
Fresh Boarder
Fresh Boarder
Posts: 3
Joined: Fri Dec 21, 2018 5:11 pm

Re: Rain and Wind data realtime

Post by metchab » Sun Feb 10, 2019 12:14 pm

hi,

you use http get from Loxone?
what version you use? in actual version http is time limited by 10 sec

Post Reply