Accumulated Yearly Rainfall Error **solved**

[Robbie936]

Meteobridge Pro total year rainfall is exactly 100mm low as compared to my vantage Pro station data.
Is there a way to edit this?
Using meteobridge 5.2 FW 1.4
Thank you

[Mattk]

Under the [History] tab, select [Edit Hour Data], select Sensor [rain0total] in the drop don, then year, Month & Day to be changed/edited. In the Edit Hour Data window click on an hourly value and there will be a pop-up allowing to edit/change the value.

If you know exactly what months/dates/times the rain fell for each hour then each interval could be edited, or just do a bulk change for a particular hour.

So why is there this exact 100mm difference? Is the Pro and VP part of the same combined sensor system? If so there should not be any difference?

[Robbie936]

Thank you for your reply Matt.
I'll check each monthly total and see if i can see where the shortfall is.
The pro takes the data from the Vantage station.

[Robbie936]

I've just checked the Station setup in meteobridge and i see the rain cup was set to 0.01 inch and not 0.2mm so that would give the accumulated error i think.
I'll just have to be aware of this for end of year total.
Thanks