WeatherUnderground data upload

[evan.mac]

I keep getting the following email from meteohub,
some times every hour or so.

Meteohub (meteohub): Cannot connect to Weather Network "weather underground rapid fire

Also when looking at the weatherunderground history
for my weather station I see alot of missing data for certain time periods.
I've attached a file showing what I mean. Has anyone run in to this problem. I also have times when weather underground says it hasn't been updated for quite some time but according to the history display it is being updated every 5 mins.

Thanks [file name=Weather_Station_History__Weather_Underground.txt size=21608]http://www.meteohub.de/joomla/images/fb ... ground.txt[/file]

[admin]

looks like your data logger is restarting again and again. Newest Meteohub versions do improve on this. What Meteohub version are you running?

However, if you have a wmr-200 you might also consider using ferrite cores on your USB cable, clear the internal data logger and work on optimization of the unit's placement to minimize rf influence.

[evan.mac]

Hi, Thanks for the response. I'm running version 4.2c. The problem has gotten worse since moving to the ebox 3300. I have a wmr100 and I have ferrite cores on both ends of the usb cable. I moved the unit about 3 feet but now I'm getting no signal from the rain gage. I will try resetting the gage and I will clear the data logger (how do I do that?). Should I see the data logger starting and stopping in the meteohub log? If so I don't see it.
Thanks,
Evan