Update Firmware Internal RF module fails

[robr57]

Hi,
As I have spurious strange recordings of my rain sensor (without rain it records 25,4 mm , see other post), I decided to update the Internal RF module. However, this fails with following messages :

Stopping loggerd... wait done.
Downloading flash tools and recent Meteostick firmware... done.
Extracting archive... done.
Resetting USB device... done.
Flashing Meteostick firmware... failed: avrdude: ser_open(): can't open device "/dev/ttyMH": No such file or directory
Starting loggerd... done.

Any clue ?

System
Platform: Meteobridge PRO *
RAM: 61500 kB total, 10548 kB free (82% used)
Storage ATP: Internal 865 MB total, 355 MB free (59% used, 331.7 yrs)
SW Version: Meteobridge 6.2 (Jun 7 2025, build 15572), FW 1.4
Uptime: 0 hours, 30 minutes Buffer: 2 items (0%)
Power Data: 5.59V 446mA 2.50W

Devices
USB Front: Kingston DataTraveler 2.0 30008 MB (partitioned)
USB Back:

Regards, Rob

[admin]

Did you try again after a reboot?

[robr57]

I just rebooted for a new release update and after 10 minutes, I did a Firmware update.
Same issue :
Stopping loggerd... wait done.
Downloading flash tools and recent Meteostick firmware... done.
Extracting archive... done.
Resetting USB device... done.
Flashing Meteostick firmware... failed: avrdude: ser_open(): can't open device "/dev/ttyMH": No such file or directory
Starting loggerd... done.

After this, the logging is no longer working until next reboot.

[admin]

Hmmm, it works on my gear, at least on 2nd try. Could you please give me a remote login? Please send credentials to "info(at)meteobridge.com".